Up
|
Tektronix AWG2021 With Option 02 (A Second Independently Programmable 5V, With 12-Bit Vertical Resolution Channel). And a 5 days right of return, and 15 days GUARANTEE on all parts and labor. This Arbitrary Waveform Generator 250 MS/s Clock Rate Provides up to 125 MHz Waveforms, 256 k Memory Depth, 12-Bit Vertical Resolution. It also Provides a Built-in 1.4MB, 3.5" Floppy Disk. (Cost $14,700.00 in '03 Tektronix) Sine, square, triangle, ramp, pulse, arbitrary, linked sequence and DC. Marker: 256 Kwords x 2 Bits. Data Points of Waveform Size: 64 to 256 K in multiples of 8. Real-time Sequencer Memory – Loop Counter: 1 to 65,535 repeats. Burst Mode Counter: 1 to 64 K cycles. Skew between CH. 1 and CH. 2 (Opt. 02 only) – Output continuous at programmed waveshape, frequency, amplitude and offset. Output quiescent until triggered by an external, GPIB or manual trigger; then generates a sequence only one time. Same as triggered mode except period is executed only for the duration of the gated signal until the sequence started is completed. Output quiescent until triggered by an external, GPIB or manual trigger; then generates "n" sequences or cycles. Continuously generates the waveform in a predefined sequence; the next trig-ger advances to the next waveform in sequence. Generates the predefined waveform once in the Autostep File; the next trigger advances the waveform. Amplitude (Excluding ADD and Multiply Operation) – Digital-to-Analog Resolution: 1/4096 (12-Bit). Range: 0.05 V to 5 Accuracy: 0.05 V to 0.5 V, ±(0.5% of amplitude +5 mV); 0.501 V to 5 V, ±(1% of amplitude +25 mV). Range: –2.5 V to +2.5 V into 50 Ohms Resolution: 0.2 mA. Accuracy: ±(1% of offset +0.2 mA). 15 ºC to +30 ºC: Flatness, within 3% after 20 ns from rise/fall edges; Aberrations, within 7% +10 mV. +10 ºC to +40 ºC: Rise/Fall time, <4.2 ns; latness, within 5% after 20 ns from rise/fall edges; aberra-tions, within 9% +10 mV. Sinewave (Amplitude 1 V, 100 kHz Reference) – Flatness: Within 4%. THD: 1.0 V, Spurious: Channel Summing (Opt. 02 only) Output: Within 5%. Frequency Response: DC to 30 MHz. Sensitivity: 2 Vp-p (±5%) signal produces 100% modulation. Frequency Response: CH 1, DC to 30 MHz; Ext. Signal, DC to 4 MHz. Output: Within 5%. Frequency Response: DC to 30 MHz. Impedance: 50Ohms Marker to Signal Delay: Within 15 ns. Amplitude: >1.2 V into 50 Impedance: 50Ohms Sync to Signal Delay: Within 15 ns. Amplitude: 1V ±0.3 V into 50Ohms Impedance: 50Ohms Digital Data Out (Opt. 03, eliminates RS-232 Interface) – Level: Differential ECL compatible. Output Signals: Data (D0 to D11). Skew Between Data: Within 1 ns. Clock to Data Delay: Within 3 ns. Connector: 8-Pin mini-D sub. Threshold Level: –5 V to +5 V. Resolution: 0.1 V. Accuracy: ±(5% x Level + 0.1 V). Pulse Width: 15 ns minimum. Input Swing: 0.2 V minimum. Maximum Input Volts: 10 Vp-p when 1 MOhms selected; 5 VRMS when 50Ohms selected. Impedance: 1 MOhms Trigger to Output Signal Delay: External clock, 100 ns maximum +1 clock. Range: 2 Vp-p (–1 V to +1 V) for 100% modulation. Maximum Input: ±5 Threshold Level: 0.3 V ±0.1 V. Input Swing: 0.8 V minimum. Pulse Width: 2 ns minimum. Maximum Input Voltage: ±2 Impedance: 50Ohms Frequency Range: Up to 250 MHz phase coherent. All Items sell with 5 days right of return, and 15 days GUARANTEE on all parts and labor. If in order to comply with our guarantee, we need to refund your money, you will get a FULL refund for the price of the unit... If you need to make use of the 15 days Guarantee - We will fix, or replace, your unit. In case every attempt to fix or replace it fails, we’ll refund your money. |
