Up
|
You are invited to purchase and/or "Make Your Best Offer" and a "very good conditioned" Seiki model XL CNC Vertical Machining Center having a Anilam Series 1100 CNC Controller controlling 2 Axis and having a Z Axis Digital Readout. The machine has a Serial Number of 7390 and being a 1992 machine with a 3 Hp Spindle Motor running on either 220/440 Volts, 3 Phase, 60 Cycle. The machine has a variable speed head with speeds from a low of 60 rpm to a high of 4,200 rpm's. The Anilam CNC Series 1100 Controller has a Part Number of 31900394, a Serial Number of 906160075-6 and a model number of 3 VH. This machine has a R-8 Spindle Nose, 10" x 50" table with coolant trough and T-Slots. The table has a mark or two but as can be seen in the listing photo of the table working surface it is in a very good condition. There is also a photo of the ways on this machine and as can be seen they are in a excellent condition. The machine additionally has a One-Shot Lubrication System installed, Way Cover covering the rear of the saddle, Kurt PowerLock "Power Draw Bar" System. In our considered opion this machine tool is in a very good condition and would make an excellent addtion to anyones machining operation. The machine is located in Dayton, Ohio 45404 and it can be seen under power by appointment. If purchased we will load at no-cost to the purchaser. Please review our "Feedback and About Us" where you will find that we ALWAYS try to fairly describe all items and offer a 7 day return guarantee (freight prepaid) if item is not as listed. We thank you in advance for your interest in this item and should you have any questions please feel free to ask them of us and we will try to answer them. |
