Up
|
MEGTEC Systems Millennium 4000 Regenerative Thermal Oxidizer (RTO). Built in 1998. Regenerative Thermal Oxidizer (RTO) with 4,000 scfm capacity @ 70F. In excellent condition. Taken off line in 2004 when facility was shut down. Built in late 1998 and treated emissions from a picture tube coating process. Available immediately. More information and photos are available on our website: www.konokogs.com. Maximum design flow- 4,000 scfm (at 70 F) [ 3,000 scfm @ 350 F] Single exhaust (main) fan with 40 hp motor Volume damper with electric actuator Combustion blower with 2.0 hp motor-direct drive Allen Bradley SLC 5/03 PLC Controls Complete owner's manual with all mechanical and electrical drawings If the refurbished option is purchased, Kono Kogs will make the following refurb/upgrades at our Green Bay facility: Provide a 95% VOC Destruction efficiency guaranteed for 60 days or completion of a stack test, whichever is sooner. (A higher VOC destruction warranty is available). Test main fan shaft bearings and replace as necessary Bench test air cylinders and solenoid valves and rebuild/replace as necessary. Bench test main motor and replace bearings/windings as necessary. Replace combustion blower motor (nearly the same cost as bearing replacement). Test all regulators, blocking valves, pressure switches & actuators and change out Pressurize gas train and leak check. Replace components as necessary. Remove and repack structured ceramic media Various other fixes that become apparent during act of refurbishment Footprint: Approximately 14’-6 long, 8'-6 wide [14’6 wide with fan] and 11' high Gas requirements: 1200 cfh @ 2.0 - 5 psi. (at full flow, cold start) As-Is: Millennium 4,000…………………………$ 84,600.00 FOB, Green Bay, WI Refurbished: Millennium 4,000…………………$ 103,400.00 FOB, Green Bay, WI |