Up
|
ONE USED LAPOINTE - ESPEN LUCAS ALUMINUM BILLET SAW CAPACITY: 9" TO 32" DIAMETER SOLID ALUMINUM BAR BLADE SPEEDS: 5000 / 2500 SURFACE FEET PER MINUTE - USING 84" DIA. SAW BLADE MOTOR: 200 H.P., 1200 / 600 R.P.M. FEED SPEEDS: 0 TO 99 INCHES PER MINUTE, INFINITELY VARIABLE HYDRAULIC UNIT: 40 GALLON USING MEDIUM DTE225 SEC AT 600 PSI., 100 F OIL LUBRICATION: 5 GALLON TRABON, USING WAY LUBE #90 OR EQUIVALENT TWO VERTICAL ACTING HYDRAULIC CLAMPS ARE PROVIDED, ONE EACH SIDE OF SAW PATH. BOTH CLAMPS HAVE CAPACITY ADJUSTMENT, POWER DRIVEN FROM 9" TO 32". BY 200 H.P. 1200 / 600 R.P.M. MOTOR CONNECTED TO INPUT SHAFT OF SINGLE REDUCTION SYKES HERRINGBONE DRIVE. GEAR SHAFT IN SADDLE TURNS IN ANTI-FRICTION BEARINGS. REPLACEABLE NON-METALLIC LINERS ARE INSTALLED ON ALL AREAS OF SADDLE THAT BEAR ON THE BASE OF THE MACHINE. THERE ARE FIVE TAPER GIBS TO GIVE ADEQUATE ADJUSTMENT TO COMPENSATE FOR NORMAL WEAR ON THE LOWER PORTION OF THE SADDLE THAT BEARS ON THE BASE. THIS ADJUSTMENT WILL MAINTAIN THE ORIGINAL ALIGNMENT AND RIGIDITY OF THE SADDLE IN OPERATION. *MACHINE AND CONVEYORS INCLUDE THE FOLLOWING: (1)Â Â Â Â Â SAWÂ Â Â Â 15' LONG X 7' WIDE X 9' TALL (2)Â SKIDS OF CONVEYOR 10' LONG X 3'6" WIDE X 5' TALL (1) SKID OF CONVEYOR & PARTS 4' LONG X 4' WIDE X 6' TALL (1)Â Â Â CONVEYOR (SKIDDED)Â Â 12' LONG X 3'6" WIDE X 5' TALL (1)Â Â CONVEYOR TOP (SKIDDED) 2'Â LONG X 2' WIDE X 8' TALL (1)Â OFF FEED INDUCER (SKIDDED) 11' LONG X 7' WIDE X 6' TALL (1) HYDRAULIC UNIT (SKIDDED) 4' ;ONG X 4' WIDE X 6' TALL (2)Â ELECTRICAL PANELSÂ 7' LONG X 4' WIDE X 2' TALL (1)Â Â CHIP COLLECTORÂ Â 17' LONG X 7' WIDE X 9' TALL IF YOU HAVE ANY QUESTIONS OR WOULD LIKE TO SCHEDULE AN INSPECTION OF THIS MACHINE IN OUR WAREHOUSE IN DETROIT, MI - PLEASE CALL .... |
