Up
|
Welcome to Select Machine Tool One used (1) Each – TOS SN50C/1500 20 x 60 Lathe, 220/460, 3Ph, 60Hz, Swing-over bed, (500mm) in. 20 -over cross slide, (270mm) in. 10.62 Distance between centers of SN50C/1000 in. 60 Maximum weight of workpiece, (300 kg) lbs. 661 Width of gap in front of faceplate, (230mm) in. 9.05 Width of bed, (340mm) in. 13.38 Speeds - range (over two ranges) rpm 22.4-2000 Number of longitudinal and cross feeds # 38 - longitudinal feeds in/rev 0.002-0.242 - cross feeds in/rev 0.001-0.12 Threads - whitworth t.p.i. 1-80 Leadscrew - diameter, (40mm) in. 1.57 Rapid traverse - cross, (1500mm/min) in/min 60 - longitudinal, (3000mm/min) in/min 120 Diameter of barrel, (70mm) in 2.75 Travel of barrel, (180mm) in 7.08 If you are a Virginia resident 5% state sales tax will be added. User agrees to indemnity and hold harmless Seller of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agents to follow instructions, warnings, or recommendations available from the original manufacturer, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. |