Up
|
SYNTHES TITANIUM SOLID HUMERAL NAIL INSERTION LOCKING SYNTHES TITANIUM SOLID HUMERAL NAIL INSERTION AND LOCKING SET IN THE LATEST SYNTEST GRAPHIC CASE This Solid Humeral Nail Insertion and Locking set is universally designed for antegrade or retrograde insertion in either right or left humerus. The compression locking option allows controlled reduction of the distracted fracture. The compression locking with retrograde nail insertion may also be used with antegrade insertions. Oblique and transverse locking is also possible on both retrograde and antegrade insertions. SYNTHES has been regarded as the best in orthopedic implants for numerous reasons and the two most notable reasons are their dedication to the orthopedic field and a pedigree in Osteosynthesis that no other manufacturer could match. How can the competition match a company whose sole purpose is to manufacture Osteosynthesis products and was created in cooperation with the foundation dedicated in the study of Osteosynthesis? That fact alone gives SYNTHES an edge over the competition; however, there is another part of the equation that makes being number one a foregone conclusion. The other part of this equation is an institute for developing non-magnetic, fatigue-resistant, break-proof, non-corrosive alloys which are still used today for the renowned Rolex and IWC watches. The unique synergy created by these two foundations is behind the SYNTHES label. Although sufficient justification exist to explain why SYNTHES products are the most expensive in the market it means little to those who could not afford it. DBLMED is doing its part to make health care affordable and that is the reason why we are making this SYNTHES tray available through Medical Depot at a fraction of its cost. The Synthes Titanium Solid Humeral Nail Insertion And Locking Set comes with the following instruments and implants. 292.26 2.5 mm Kirschner Wire, 285 mm, trocar point, pkg. of 6 310.44 4.5 mm Drill Bit, quick coupling, 145 mm 351.12 Cannulated Awl with T-Handle 356.97 3.2 mm Three-Fluted Calibrated Drill Bit, quick coupling, For 3.9 mm Locking Bolts 215 mm/80 mm calibration 358.68 8.5 mm/3.5 mm Conical Burr with quick coupling 358.591 Radiographic Ruler for use with Proximal Humeral Nail 321.20 Ratchet Wrench, 11 mm width across flats 358.610 Compression Connecting Screw 355.70 11.0 mm/8.0 mm Protection Sleeve for measuring bolt length and inserting proximal locking bolt 355.75 8.0 mm Trocar for use with 11.0mm/8.0 mm Protection Sleeve (355.70) 355.72 8.0 mm/3.2 mm Drill Sleeve, 110 mm 314.25 Hexagonal Screwdriver 2.5 mm width across flats , for 3.9 mm Locking Bolts, for use with Solid (Stainless Steel) Tibial Nail System 314.11 Holding Sleeve for use with Hexagonal Screwdrivers 314.25, 314.27, 314.19, 314.26, and 314.56 314.75 Hexagonal Screwdriver, 4.0 mm width across flats, for use with 3.9 mm and 4.9 mm Titanium Locking Bolts 319.97 Screw Forceps, for removing screws from screw rack 357.79 Depth Gauge, for 3.9 mm and 4.9 mm Locking Bolts, measures up to 90 mm 356.49 Inserter-Extractor, Attaches to Connecting Screw (356.54) for insertion of Solid Tibial Nails and Titanium Humeral Nails 332.200 Slotted Hammer for use with Inserter-Extractor (356.49) Titanium End Caps (blue) Used for Titanium Solid Humeral Nails 3.9 mm Titanium Locking Bolts (blue) Used for locking of Titanium Tibial (up to 9 mm dia.) and Humeral Nails PLEASE NOTE THE LAST TWO PICTURES ARE OF THE SYNTHES TINTANIUM TIBIAL NAILS ALSO AVAILABLE AT MEDICAL DEPOT *Price presented must be verifiable and the dealer must have said item in stock. Quality must be reasonably similar i.e. dirty rusted implants compared to new implants. *1 The additional ten percent is computed from the difference between the price presented and the purchased price. Money Order/Cashier's Check, Personal Check |