Up
|
Sumitomo 37SE Micro-Core Alignment Fusion Splicer Kit Model/Part No: T-37SE Item Code: sumitomo-37se-n Splicer, cleaver, case, power cord, manual, spare pair of electrodes, and battery pack. *****************Special Purchase************* Sumitomo Type-37SE Micro-Core Alignment Fusion Splicer Kit. As far as the manufacturers 1 year warranty it is unclear who will service the unit since we are not authorized dealers so we can not guarantee their warranty. We have not had any problems as of yet, but we will do our best to help if a problem arises. The Type-37SE Micro-CoreTM is a lightweight, portable, fully automatic, self-contained instrument for creating low-loss optical fiber splices. This full-featured splicer features a user-friendly software package with on-screen operation instructions that help simplify training requirements. It is highly portable at only 9.0 lbs and can receive power via an internal AC power module or internal 12V DC battery module. The splicer automatically aligns a pair of optical fibers in both the X and Y (horizontal and vertical) planes and then fuses them together with heat from an electric arc to form a low-loss splice. HDCM (High-resolution Direct Core Monitoring) image processing software in the splicer is used to perform core alignment and estimates the splice loss. The operation can be performed in as little as 11 seconds with a typical splice loss of 0.02 decibels(dB) for identical single-mode fibers. Alignment Method Core Alignment — High-resolution Direct Core Monitoring (HDCM) Fiber Requirement Silica Glass Profile Type SMF, MMF, NZ-DSF, CSF, Er-doped Fiber Cladding Diameter 80 to 150µm Coating Diameter 250 to 900µm Cleave Length 8 to 16mm Typical Splice Loss, Identical Fibers SMF: 0.02dB MMF: 0.01dB NZ-DSF: 0.03dB Number of Fusion Condition Settings 48 Total Splice Parameters 5 Adjustable Parameters Number of Fiber Profiles 40 Arc Test Compensation Automatic Number of Heater Condition Settings 10 Menu Selection User Friendly Menus Typical Splice Cycle Time 11 Seconds, Quick Mode, 15 Seconds, Standard (Set to Loss Estimation) Typical Heater Cycle Time <40 Seconds Proof Test Standard, 200 Grams (0.44 lb) Splice Data Storage 2400 Splices (Built-in Memory) Item New/Used?: NewItem Tested?: Tested Physical Condition: ExcellentWorking Condition: Excellent |