Up
|
Striko Dynarad Melt Furnace. Model - MS-260, Serial Number 1369, 44 KVA, 110 Amps 240 Volts 60 Herz, 3 Phase This furnace came out of a aluminum coating production line, where it was acting as a molten aluminum resevoir. It has a crucible and furnace wall with a hole in one side where there was a ceramic pipe which flowed molten aluminum over to a second furnace. Probably the hole can be plugged to allow the full capacity of the crucible. Worst case another crucible will be required. The manufacturer lists the stock crucible with out the side hole at about $1000 USD. There is also a bell jar included that was inverted inside the crucible to allow for level control of the molten aluminum in the crucible. Production operating temperature of this unit was about 800F. We have a temperature controller for this unit, and are still looking for a power transformer before we can start the smelter up ourselves. The temperature controller is a Watlow Solid State Power Control model PC20-F25B-0000. See below for temperature control photos. The heater crucible is about 21" inside diameter and 23" deep. The wall thickness is about 1.5". Oven box is about 48" wide x48" long. We also have a second smelter which has a broken crucible, it could be available at a lower cost as well. Please contact us if you are interested to talk about this unit. If you email us a phone number, we will call you. |