Up
|
For Sale 1 security cage 20 x 32 x 12' high withe gate.This is a 4-wall system 4x8 pannels with post, with 1 hinged 5 foot wide doors & keyed lock application.. These panels stack one on top of the other between tubular posts to reach the finished partition height. This all-welded, modular, stackable system has benefits unequaled in the industry! Need to protect your valuables? Wire partitions could be your answer! Whether you're wanting to protect & secure just a few hundred dollars of equipment or valuables or if you're wanting to make sure your inventory worth 100's of 1000's of dollars is properly stored & secure. Simple, economical, modular design for your application. Whether it be for a storage locker, security cages, tool room crib, DEA approved enclosure, physical barrier, inventory control, or secured access to your storage area, these wire partitions are amazingly versitile! Panels: are constructed of 10 gauge steel wire, woven into 2' x 2" rectangular mesh Frames: have 7/8" x 7/16" slotted holes for mounting to posts and adjacent panels. Posts: are made of 2" x 2" x 14 gauge (.083) steel tubing. Base plates of 4" x 4" x 1/4" steel flat with two 7/16" round holes for floor anchoring, asre welded to each. . Posts are drilled w/ 1/2" holes to accept hardware for mounting panels & doors. Hole spacing is set to leave a 3-1/4" sweep space below the panels. Doors: are constructed of 10 gauge steel wire, woven into 2" x 1" rectangular mesh & securely welded 1-1/4" x 1-1/4" x 1/8" steel angle frame. Stiffeners, two horizontal and one vertical, of 1/4" x 3/4" steel flat are securely welded to the frame behind the mesh. Two gate posts, hardware, and Cylinder locksare supplied w/ each door. Check for our other security cage listings “Item subject to prior sale |