Up
|
* Two switches are available to set the impulse length and welding frequency. * Larger impulse lengths set using the switch allow increased penetration depth as required, which results in improved strength of welding points. * Setting a shorter welding frequency, combined with a stronger power supply, helps you work more quickly. * The output range has also been expandet: in addition to smaller welding points, the PUK2 allows you 30% more performance than the PUK111. * The functional principle is the same as the PUK111: as soon as the electrode in the tip of the handpiece touches the work piece, the electric circuit closes and the welding process begins. A small arc is emitted from the point of contact; a small welding point 0,6 - 3 mm in diameter melts the metals together and a stable welding point occurs. * By using protective gas during welding, oxidation is largely avoided, so that the work piece can be processed further without any additional treatment. Results are welding points with maximum homogeneity and a smooth as silk feel. * Using the PUK2, the heat created by the arc is very low. This allows workpieces to be easily held by hand. * Welding is possible for all precious metals and precious metal alloys, plus stainless steel and titanium, as well as bronze, copper and tin alloys. * In general, all metals that are well-suited for arc welding are also suitable for PUK welding. * All devices are manufactured according to VDE guidelines and based on conformity requirements of the CE designation, and demonstrate high quality production features of equipment made in Germany. Got questions ???- e-mail me |