Up
|
Listed below are the specifications for the model as well as a brief description of the operating instructions. * Modular panel construction with cam lock attachment * Stainless steel interior and exterior * Easy access heat and humidity system * Self Contained Refridgeration system charged at the factory. * Eye-level digital control panel -Program to proof, retard, or both * Flush floor - no ramp required Three single end or side load racks or two double racks. Physical Data 50" Interior Depth Interior Dimensions 50.0"D x 51.5"W 127.0cm x 130.8cm Interior Dimensions 56.0"D x 60.0"W x 99.5"H 142.2com x 152.4cm x 252.7cm Net Door Opening 75.0" STD / 72.0" Pass-Thru 190.5cm / 182.9cm Net Door Opening Width 51.0" / 129.5cm Power Input with Neutral 208-240V/1/18.4-20.4A or 208-240V/3/18.4-20.4A 1/2" NPT Cold Water 30-80 psi at 85" (215.9cm) AFF. 1/2" NPT, front or rear drain at 5" (12.7cm) AF. Route to air-gap drain. Provide connection(s) at 85" (215.9cm) AFF. Operating instructions for Baxter’s BXPR controls 1. To set the clock before your 1st use: · Push the Retarder/Proofer mode button. · Follow the prompts on the LED screen. · Push the Proofer mode button. · Enter your desired settings (time, temp, humidity) To set the unit for retarding: · Push the Retarder mode button. · Enter your desired settings (temperature) To set the unit for automatically retarding then proofing: · Push the Retarder/Proofer mode button. · Choose “set/review program · Follow the prompts on the LED screen to enter the entire program. You will have to cycle through the entire week before you can exit the program. This mode is designed to automatically go from retard to proof unattended based on finishing the proofing cycle at your set time. Once the unit is finished with it’s set program, it goes into the standard proofer mode and operates as a proofer. It will not automatically go into a retard mode. |