Up
|
FREE FREIGHT On This Order Anywhere in The Continental US ** NOTE: Any Residential/Tailgate or Re-Delivery Charges NOT INCLUDED • 16 speeds from 45-1800 rpm • D1-4 spindle with 1 1/2" bore • 40 kinds of inch threads from 4-112 tpi • Removable gaop bed for large diam. work • Magnetic controls and spindle foot brake • T-slotted compound and front pull-out chip tray • Main spindle hardened & precision ground • Bed made of fine grain high tensile cast iron • Bedways induction hardened & precision ground • All gears & shafts hardened & precision ground • Main spindle supported at 3-point by precision bearings • Tool kit with tools & leveling pads • Spindle jog button control • 5-C lever type collet closer Distance between centers - 40" Max. swing over cross slide- 8 5/8" Effective length in gap - 6 1/4" Spindle nose (spindle mount) D1-4 Diam. of spindle thru bore - 1 1/2" Spindle taper (with sleeve) M.T. 5 (M.T. 3) Spindle speeds - 45-1800rpm, 16 steps- 45,70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800, rpm Longitudinal Feeds - 0.0012-0.0294"/ REV. (40 kinds) Cross feeds - 0.0003-0.01" Rev. (40 kinds) Inch threads - 4-112 tpi (40 kinds) Metric threads - 0.45-7.5 mm (22 kinds) Diam. of long leadscrew - 7/8" Pitch threads of long leadscrew - 8 tpi Max. travel of cross slide - 7" Max. travel of compound slide - 4" Diam. of tailstock quill - 2 3/4" Taper of tailstock quill center M.T. 3 Max. travel of tailstock quill - 4 3/4" Power of main motor - 3HP, 220V 3 PH, 2 speed Power of coolant pump - 1/8 HP, 220V, 3 PH Overall Dim. (l x w x h) -72" x 31" x 49" |