Up
|
GTWY10-1000 Single Person Electrical Work Platform NEW Single Person Electrical Work Platform * These vertical personnel lifts consist of a work platform attached to an aluminum mast that extends vertically, which in turn is mounted on a steel base. This is a "push-around" machine which can be rolled in their retracted position through standard door openings, yet reach platform heights of up to 33 ft (10 m) when fully extended 1420*840*2120 mm56" x 33" x 83.5" Must Have Forklift for Delivery These machines are intended for level surface use. Do not use on inclined surfaces Always use outriggers & Interlocks properly Fall arresting devices and protection must be worn OSHA Compliance Operator Training is required to safely operate this equipment. All aerial lift standards require operators to read the operator's manual prior to use. Always perform pre-start inspection. These can cover controls, safety devices, machine components, and warning signs and decals. Operators must perform required pre-start inspections of the machine, as well as the workplace, in order to avoid possible unsafe conditions such as drop-offs, holes, bumps, floor obstructions, debris, overhead obstructions, inadequate surface support, and hazardous wind and weather conditions. Operators must ensure the lift is handled within the limits set by the manufacturer The safety of the operator as well as others depends on the actions of the operator; therefore, the operator must follow good safety practices accordingly All future repairs and maintenance to be made by a qualified person using equivalent replacement parts Always keep operator's manuals are on the machine As with any piece of equipment, safety should be the primary concern. Remember every lift brand is different. Each operator should familiarize themselves with that particular machine. If someone is not familiar, they should always refer to the operating manual provided. Before each use, visually inspect the equipment. This inspection should include making sure parts are in proper working order, checking fluid levels, tire condition, proper tire inflation and the legibility of safety decals. It is equally important to survey the work area and adjacent space to gauge ground conditions and any overhead hazards such as power lines and hanging objects. Operators should also wear a safety harness while they are operating the machine. Each person who will operate the lift must understand the proper operation of the machine, its intended use and maintenance requirements. Also understand any applicable aerial lift regulations. You can find OSHA guidelines at this site. Information on ANSI rules is at this site. Be sure to add our business to your favorites list Location: Hilliard, OHIO (Suburb of Columbus) * Add us to your Favorites list 4974 Scioto Darby Rd, Hilliard, OH 43026 Monday-Thursday 9 am to 7 pm EST When emailing us, please indicate item name & number. Also include your full name, and address. Money order / Cashier's check No Personal or Business check Local pickup is accepted. Call to arrange pickup. If you find any damage to the goods after you open the package, you should keep all packing material and contact the carrier immediately within 24 hrs to report the damage and file a claim. * Image on the listing represents the actual product unless stated otherwise. Thank you for your business and have a great day! |