Up
|
MORI-SEIKI ZL-25MC/1000 4-AXIS TURNING CENTER Serial # 159 New 1996 Model # ZL-25MC/1000 Swing Over Cross Slide: 13.78" Maximum Turning Diameter: 13.39" Maximum Turning Length: 40.55" X-Axis Travel, Turret #1: 11.3" Z-Axis Travel, Turret #1: 42.9" X-Axis Travel, Turret #2: 5.7" Z-Axis Travel, Turret #2: 42.9" Spindle Speeds: 35 to 3500 RPM Upper Turret Tools: 12 (6 Live Tool Positions) Lower Turret Tools: 8 (No Live Stations) Shank Height for Square Tools: 1" Shank Diameter for Boring Bar: 2" Turret Index Time: .7 Seconds Per Station Live Tool Speeds: 80 to 2000 RPM Rapid Feed Rate, X-Axis: 472.4 IPM Rapid Feed Rate, Z-Axis: 590.6 IPM Cutting Feed Rate Per Revolution, X-Axis: .0001" to 9.9" Cutting Feed Rate Per Revolution, Z-Axis: .0001" to 9.9" Jog Feed Rate, X & Z Axis: 0 to 50 IPM Tailstock Quill Diameter: 4.3" Tailstock Quill Taper: #5 Morse Upper Turret Live Tooling with Full C-Axis Spindle LNS Hydrobar Spring S2 Bar Feeder Serial # 16177-96, Model # S2, New 1996 Air Pressure Required: 75 to 90 PSI Equipped with Rear Mounted Bar Loader, Large Assortment of Bushings Cool Jet Systems High Pressure Coolant System Serial # 3193, Model # 70-30SF Rated Capacity: 8 GPM at 1000 PSI 6 HP Motor, Wired for 3 Phase, 208-230 Volts Required Inlet Pressure: 20 to 60 PSI Exit Conveyor for Parts Catcher, Approx. 96" Long Full Length Chip Conveyor with Right Side Exit Tool Presetter for Front and Rear Turret All Available Manuals for Lathe, Bar Feeder and Coolant System Approx. 9,800 Hours Cutting Brass 18.5 KW Motor, 30 Minute Rating Machine: 203" L-R x 84" F-B x 84" H x 19,100 Lb. Bar Feed: 177" L-R x 31" F-B x 52" H Exit Conveyor: 101" L-R x 12" F-B x 30" H Chip Conveyor: 106" L-R x 41" F-B x 55" H Coolant System: 36" L-R x 17" F-B x 61" H Bar Tube Rack: 78" L-R x 30" F-B x 56" H Bar Feed Loader: 100" L-R x 48" F-B x 48" H (2) Skids: 36" F-B x 24" L-R x 16" H Each PRICE: Loaded on Truck, Our Warehouse, York, PA |
