Up
|
Welcome to Select Machine Tool MONARCH MODEL 10EE Tool Room Lathe SWING OVER BED: 12-1/2 SWING OVER CROSS SLIDE: 7-1/4 DISTANCE BETWEEN CENTERS: 20 DISTANCE SPLINDLE CENTER TO FLOOR: 43-1/2 FLOOR SPACE: 29 X 51 HOLE THRU SPINDLE: 1-10/32 CENTER, MORSE TAPER: NO.2 SPINDLE BEARINGS: PRECISION USASI CAMLOCK SPINDLE NOSE: 3-D1 SPINDLE SPEED RANGE-HIGH #1: 30 TO 3000 RPM; #2: 40 TO 4000 RPM SPINDLE SPEED REDUCER #1: 5 TO 500 RPM #2: 6.5 TO 650 RPM LEADSCREW DIAMETER AND THREADS PER INCH 1-8 TPI RANGE OF THREADS 3 TO 184 RANGE OF FEEDS THROUGH ENDLESS BELT .0005 TO .016 NUMBER OF THREAD CHANGES 60 NUMBER OF FEED CHANGES 50 ACTUAL THREADS CUT: 3,2-/4,3-3/8,3-1/2,3-3/4,4,4-1/2,5,501/2,5-3/4,6,6-1/2,6-3/4,7,71/2, 8,9, 10,11, 11-1/2,12,13,131/2,14,15,16,18,20,22,23,24,26,27, 28,30,32, 36, 40, 44,46,48,52,54,56,60,64,72,80,88,92,96,104, 108,112, 120, 128, 144,160,176, AND 184 LEADSCREW DIAMETER AND LEAD 1 – 8TPI RANGE OF MM LEADS 186 TO 11.5 REVOLUTION 013 TO 406 NUMBER OF LEAD CHANGES 25 NUMBER OF FEED CHANGES 50 TAILSTOCK SPINDLE: DIAMETER 1-3/4; BED: WIDTH 10-1/2 X DEPTH 10-1/4 MOTOR SIZE 5 HP If you are a Virginia resident 5% state sales tax will be added. User agrees to indemnity and hold harmless Seller of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agents to follow instructions, warnings, or recommendations available from the original manufacturer, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. |