Up
|
The Digitale Lift Station Upgrade Package can economically transform your old lift station into a modern self diagnostic station with an electro-mechanical backup system. The system is designed to fit inside an existing lift station control panel or be mounted adjacent to the panel. An easy to use digital operator interface allows the user to adjust the following settings: (Resolution for level settings is in 1/100ths/ft.) o The level at which both pumps stop running. o The level at which the lead pump starts. o The level at which the second pump starts running. o Sensor offset or zero value. o Sensor gain value used to convert signal value to feet. o Turn pump alternator on or off. o Select between sensor and float mode of operation. Front panel mounted selector switches and pushbutton allow the user to quickly control the station. o Hand- Pump 1 runs with all controls bypassed. o Off- Pump 1 does not run under any circumstance. o Auto- PLC controls pump. Pump will also run in electro-mechanical bypass mode if the high level alarm float is reached. o Hand- Pump 2 runs with all controls bypassed. o Off- Pump 2 does not run under any circumstance. o Auto- PLC controls pump. Pump will also run in electro-mechanical bypass mode if the high level alarm float is reached. Standard alarm messages notify the user of the following alarm conditions: Optional alarms can be incorporated as needed: o Pump Circuit Breaker Tripped Digitale Lift Station Upgrade Package Pressure Transducer with 40 ft cable Composite enclosure (NEMA 12 rating on assembly) Installation and operation manual CD with program and literature soft copies Magnum Electric specializes in controls and installations for water and wastewater systems. We build controls ranging from fractional horsepower single pump residential to 100HP 3 pump municipal. We can handle all your water pumping needs! Learn more at www.magnumelectric.biz |
