Up
|
Labconco 6' Protector Premier Lab Hood ++ NICE ++ SpillStopper Work Surface - 2 Acid Storage Cabinets & Fiberglass Blower This sale is for a Nice Labconco 6' Protector Premier Lab Hood complete with Epoxy work surface, 2 Acid Storage Cabinets and remote fiberglass blower. Unit was just removed from a closing lab and is still in calibration. New this configuration would cost over $13,000 on VWR's website. This sale includes the following: * Labconco 6' Protector Hood Model 7280100 * 2 Labconco Protector Acid Storage Cabinets Model 9901100 * Labconco Fiberglass Blower w/ roof Stand Model 71810003726 Due to the size and weight local pick up only. 6' Protector Premier Laboratory Hood 6' Protector Premier Laboratory Hood, by-pass airflow design, chemical-resistant molded one-piece fiberglass liner, preset baffle, 3/16" thick tempered safety glass with vertical-rising counterbalanced sash, ergonomic air foil with Clean-Sweep openings, 12.81" ID exhaust connection, front access panels, ADA-compliant light and blower switches, glacier white dry powder epoxy-coated steel exterior. Contact Labconco for explosion-proof models. Item Dimensions: 72"w x 33.2"d x 59"h Electrical Specification: 115 volts, 60 Hz, Domestic Product Subcategory: General Chemistry Electrical Requirements: Domestic Blower Requirements: Remote blower required Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805, CE Conformity Marking (230 volt models) Air Usage/Static Pressure with Sash Full Open: At 100 fpm, exhausts 1180 CFM at 0.31" H2O static pressure Air Usage/Static Pressure with Sash Open 18": At 100 fpm, exhausts 750 CFM at 0.14" H2O static pressure Protector Acid Storage Cabinet Protector Acid Storage Cabinets support all Labconco benchtop fume hoods and safely store and vent acids and other corrosive liquids. Features: two rear vent connection cutouts for venting the cabinet into a fume hood; durable epoxy-coated steel construction; corrosion-resistant polyethylene-lined interior; glacier white exterior that complements laboratory casework and Labconco fume hoods; manual-closing, non-locking door(s). Includes vacuum-formed PVC liner tray, four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30". Internal dimensions: 20.75" deep, 29.88" high and 23" of opening height for clearance. Item Dimensions: 36"w x 22"d x 35.5" to 36.75"h SpillStopper Work Surface, 6' wide x 36" deep, solid epoxy, 1.25" thick, dished to retain spills and has a 1" radiused front edge to direct airflow into the hood. Fiberglass Blower, recommended for moderate to highly corrosive applications. Features: Molded fiberglass reinforced polyester housing for durability and long life; impellers are made of injection-molded polypropylene; inlet and discharge diameters are sized to receive rigid PVC ducting material directly for easy installation; dry powder epoxy-coated base and weather cover provide long life in extreme weather; adjustable sheaves allow for air volume adjustment; low RPM for quiet operation; impeller is bonded directly to shaft to reduce maintenance and increase life; flow-through vent holes and louvers allow air circulation that cools the motor, prolonging motor life; self-adjusting gravity belt tightener; variable exhaust orientation adjusts to eight outlet positions. Contact Labconco for complete blower performance data. Provides a range of 550 to 960 CFM at .12" to .38" static pressure. Electrical Specification: 115V/60 Hz/1Ø/4.4 amps Inlet/Outlet: 12.38" OD Inlet, 12.75" ID Outlet Product Subcategory: Fiberglass Blowers Due to the size and weight local pick up only. We will also take money orders. |