Up
|
JUKI-LU-1500N Series-Lockstitch Heavy Duty Walking Foot ANYWHERE ELSE EITHER ONLINE OR BY PHONE CALL US TOLL FREE AT LU-1508NH (for extra heavy materials) * Needle Feed And Walking Foot * New Rectangular Feed Prevents Gathering * Includes Table, Stand, And Motor * Handles Heavyweight Materials * New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering * Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration * Compared with elliptical feed, rectangular feed helps reduce gathered stitches * With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly * Well tensed seams are consistently produced without pitch errors * With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses * Stitch length can be easily selected by the stitch dial * Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large handwheel * Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter * Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head * Alternating vertical movement mechanism prevents irregular stitches * Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency * If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage * Pressing the reset button will immediately return the machine back to the normal state * Maximum stitch length: 9 mm * Alternating vertical movement: 2.5 mm - 6.5 mm * Thread take-up: slide type * Hook: Vertical-axis, double-capacity hook * The LU1508 has replaced the LU-563 and the LU-563N LU-1560N Double-needle1/4" Gauge , Unison-feed, Lockstitch Machine with a Vertical-axis Large Hooks (with automatic lubricating mechanism). * 2-needle type machine 1/4" guage between needles * Delivers the basic functions and performance best suited to the sewing of heavy-weight materials * Automatic lubricating mechanism improves maintainability * The sub oil pan and double filter prevents dust from entering the oil. * Knee-lifter mechanism is built in * Stitch length can be easily selected by the stitch dial * Extra large vertical axis hooks * The machine is full open type top design for easy maintenance and adjustment Spec Brands appreciates your business. Summary of My Selling Policies ATTENTION ! Electrical Requirements ! All our products are offered in 110V USA standard and special adaptor and/or voltage converter will probably required in other countries.Do not plug straight into a outlet without checking the manufacturer's instructions. The warranty does not cover damage due to improper installation, power surges or connection to incorrect voltage. Read my policies on my SquareTrade Seal |