Up
|
See our website under about about me above, or call Sales Ext. 112 Manufactures Suggested Retail Price when new was: $125,000.00 Back Ground Information asset: JN01FB Japan Automatic Wire Crimping Machine. We are not familiar with these machines and have no way of testing them. This was reported to have been working fine when pulled from service. This asset is being sold due to an entire plant close down and not due to a problem with the asset. This unit is available for your inspection at our Del Rio Texas warehouse. 3rd Party Inspection report for asset: Factory information on the JN01 units: This is standard machine by computer control from touch panel. Non-contact type strip-miss and crimping-miss sensor are installed as standard. Non-contact strip-miss sensor makes crimping stable more than present machine. Strip chip vacuum system makes a workshop clean. Wide range wire processing and harness available. (Compared with JAM MINIC V) measuring, cutting, both ends stripping, both ends crimping, auto-blade depth adjustment, auto-crimping position adjustment, auto-strip length adjustment, half-strip on No.1 crimping, step driving 1.0sec/pce (in case of Min. wire length) in case of half-strip, machine speed will be down due to wire kinds 0.08-2.0mm² (AWG#28-#14) Max.O.D 3.4mm 50-20,000mm(9,999mm) Min. cutting length varies depending on stripping length and type of terminal. variation within 1mm+(set length × 0.002) No.1 side: 1.5-13mm (20mm w/o crimping, 35mm half-stripping) air pressure down, crimping miss, wire stripping miss, abnormal action of wire reel stand AC200V(within ±10%) 50/60Hz single phase 7A 0.5Mpa(5kg/cm²) approx.200NL/min (use clean dry air) wire reel stand(bundle, reel), wire pre feeder, paper winding unit, belt chute, wire joint detector, terminal presence/overload detector, emergency light ASY, other maker's applicator conversion kit Asking price or please call or email to make offers! Asset Location: DRW1: Main Del Rio TX. ZIP 78840 Area: STORAGE Photos of actual asset Industry: Wiring harnesses, electrical leads, cable, and electro-Mechanical assemblies supplies & equipment Description & Quantity in stock: J.A.M. Japan Automatic Crimper JNO1SVV-WP wire harness Tested: Not able to test but looks good Please see inspection report below for 3rd party inspection reports when available Horsepower / Amps / KW / KVA: 50/60Hz Please do not use on future data entry! |