Up
|
MACHINE TOOLS * PRINTING SHOPS * PLASTICS INDUSTRY * TEXTILE INDUSTRY Ingersoll-Rand Cycling Dryer, 2001 Ref charge: R-22, 13 lb per circ The following information was provided by the manufacturer: (available for faxing or emailing) Overall Dims 96 " x 138 x 82; 6,000 lbs The warm, most air enters the dryer at the inlet flante and is pre-cooled in the tubes of the economizer by the chilled leaving air system passing through the shell. The pre-cooled air is then chilled ot the design dew point temp as it passes through the tubes of the air chiller. The throttling valve is provided to adjust the circulation flow rate. The condensed moisture is removed form the air stream by the stainless steel mesh separator. The pneumatically operated drain automatically purges the accumulating condensate to the building drain on demand. After the condensed moisture has been removed, the air is conducted through the shell of economizer where it is reheated and exits the dryer through the outlet flange. Plant water for the condensers enters through factory supplied regulating valves. Complete company information: address, contact person, phone number, fax number, destination address if different then company address already provided. Payable to A&A Machinery Sales Wire Transfer, Cashier’s Check/ Money Order accepted for immediate release. Personal/ Business Checks need approximately 2 weeks for confirmation that the check has cleared our bank before item is released. Trucking, palletizing or loading / securing into overseas container CONVENIENTLY SERVING PENNSYLVANIA * NEW JERSEY * DELAWARE 201 DEAN SIEVERS PLACE * MORRISVILLE, PA. 19067 |
