Up
|
Scott-Gross Company, headquartered in Winchester, KY, was established in 1949 and is primarily known as a supplier of Industrial, medical, and specialty gases, bulk and cryogenic gases, dry ice, welding equipment and supplies, welder rental and repair, and propane exchange. Scott-Gross Company has retail stores located in Kentucky, Pennsylvania, Arkansas, Oklahoma, and Texas. Hypertherm Powermax 1250 Plasma Cutter 200-600V Mechanized System with 25' Machine Torch - 087012 High-Performance Portable Plasma Cutting System Recommended Capacity: 3/8" (10 mm) Maximum Capacity: 5/8" (16 mm) Brand New Hypertherm Powermax 1250 Plasma Cutter 200-600V Mechanized System with 25' Machine Torch - not refurbished, not rebuilt, not reconditioned. Genuine Hypertherm product - stock number 087012 Metal scrapping and dismantling Industrial equipment manufacturing and repair Truck and trailer manufacturing and repair Input Voltages: 200 - 600 V, 1- or 3-PH, 50 - 60 Hz CSA Input Current @ 12.0 kW Phase 1: 200/208/230/240/480 V, 1-PH: 70/70/60/58/31 A Input Current @ 8.4 kW Phase 3: 200/208/230/240/400/480/600 V, 3-PH: 41/40/37/34/21/17/17 A Duty Cycle @ 40° C (104° F): 60% @ 80 A, 230 - 600 V, 3-PH Duty Cycle @ 40° C (104° F): 60% @ 80 A, 480 V, 1-PH Duty Cycle @ 40° C (104° F): 50% @ 80 A, 240 V, 1-PH Duty Cycle @ 40° C (104° F): 50% @ 80 A, 200 - 208 V, 3-PH Duty Cycle @ 40° C (104° F): 40% @ 80 A, 200 - 208 V, 1-PH Dimensions: D/23.1" W/10.65" H/19.6" Gas Supply: Clean, dry, oil-free air or nitrogen Flow Rate: 400 scfh; 6.7 cfm (189 1/min) at 90 psi (6.2 bar) Flow Pressure: 70 psi (4.8 bar) flowing, 25' leads Flow Pressure: 75 psi (5.1 bar) flowing, 50' leads To see full specifications, visit http://www.hypertherm.com/languages/english/PDF/SB_PMX1250_%20860110_r7.pdf Search our Store Inventory for the products listed below. 087001 / T80 Hand Torch Assembly, 25 ft Leads 087002 / T80 Hand Torch Assembly, 50 ft Leads 087047 / T80 Hand Torch Assembly, 75 ft Leads 087004 / T80M Machine Torch Assembly, 25 ft Leads 087006 / T80M Machine Torch Assembly, 50 ft Leads 087048 / T80M Machine Torch Assembly, 75 ft Leads 087003 / T80M Machine Torch Assembly, 15 ft Leads 087005 / T80M Machine Torch Assembly, 35 ft Leads 087029 / T80M Machine Torch Assembly, 15 ft Leads, 35mm / No Rack 087030 / T80M Machine Torch Assembly, 25 ft Leads, 35mm / No Rack 087032 / T80M Machine Torch Assembly, 35 ft Leads, 35mm / No Rack 087031 / T80M Machine Torch Assembly, 50 ft Leads, 35mm / No Rack 087054 / T80M Machine Torch Assembly, 75 ft Leads, 35mm / No Rack 011092 / Replacement Filter Element for Accessory Filter 027668 / Circle Cutting Guide Assembly 128145 / 50 ft (15 m) Work Cable with Clamp 023206 / CNC Interface Cable, 25 ft 128658 / Hand Heat Shield, Gouging 128650 / On/Off Pendant for Machine Torch, 25 ft 128651 / On/Off Pendant for Machine Torch, 50 ft 128652 / On/Off Pendant for Machine Torch, 75 ft 128888 / FineCut Kit, Powermax1000/1250/1650 127099 / Powermax 1000 System Cover 127102 / Circle Cutting Guide Assembly - Basic 120927 / Nozzle, 80A, Shielded 120930 / Shield, Machine Cutting 120980 / Nozzle, 80A, Unshielded Extended 220006 / Nozzle, 40A, Unshielded Extended 220007 / Nozzle, 60A, Unshielded Extended 120931 / Nozzle, 60A, Shielded 120932 / Nozzle, 40A, Shielded 220061 / Retaining Cap, Ohmic Contact 220327 / Swirl Ring, Hand, FineCut 220404 / Shield, Ohmic, FineCut |