Up
|
HP Agilent 86101A 20 GHz Electrical/2.8 GHz Optical to E-Mail us to ask ANY questions. This is a used unit, with various small scratches, and excellent operational condition. The unit you receive will have one of the following Serial Numbers: This unit is currently in calibration from a NIST traceable, ISO calibration house as stated below in the calibration section. Units are in Calibration until 4/28/06 Unit comes as shown, no other accessories are included. All sources are traceable to NIST, except where noted. We do not supply NIST numbers in accordance with NCSLI Position Statement 96-1: "test report numbers should not be used nor required as proof of the adequacy or traceability of a test or measurement". NIST, NVLAP and A2LA have concurred with this position. NCSLI also notes that international standards ISO 900X, ISO Guide 25 (ISO/IEC 17025), ISO 10012 and ANSI/NCSL Z540-1 do not require the use or reporting of NIST test report numbers. Manufacturer's Specifications/Features: (Please note that not all features may be included in this item) The Agilent 86101A provides the an excellent measurement system for testing signals operating at 1063 or 1250 Mb/s in addition to other high-speed telecommunications signals. The calibrated, integrated optical receiver, with over 2.8 GHz bandwidth, allows for simple, precise measurements of single-mode or multimode optical signals. An typical power meter is built-in. For compliance testing, a hardware filter for both 1063 Mb/s or 1250 Mb/s testing can automatically be switched in to create a calibrated Fibre Channel or Gigabit Ethernet reference receiver. The switchable filter minimizes setup time while maximizing measurement repeatability. * Integrated/calibrated optical channel with sensitivity to below -17 dBm * 750 to 860 nm wavelength range * Automatic/switchable filters for compliance testing at both 1063 and 1250 Mb/s or 155/622 Mb/s * 20/12.4 GHz bandwidth electrical channel * 2.5/12.5 GHz trigger channel (set by mainframe) ANOTHER GREAT DEAL FROM TECHRECOVERY! * Test equipment with calibration comes with a 100 day guarantee from defects and 10 day right of return. * At TechRecovery, your complete satisfaction is our goal. If you have any questions, don't hesitate to call us at with questions. |