Up
|
HP / Agilent 8510C Vector Network Analyzer System * One HP 8510C Vector Network Analyzer Display Section with option 10 (Time Domain Capability ) * One HP 8510C Vector Network Analyzer Measurement Section * One HP 8515A S-parameter Test Set * One HP 8340B Synthesized Sweep Generator with option 005 (Rear RF Output without Attenuator), 006 (Delete Pulse Modulation), and 007 (Relaxed phase noise specifications). * Two HP10833A HP-IB Cables. * One HP 08510-60101 IF-Display Interconnect Cable. * One HP 98510-60102 Test Set IF Interconnect Cable. * Two HP 08512-20019 Short Reference Port Extension Cables * One Type N (m) to N (m) Coaxial Cable * One Midwest Microwave 2583 SMA-Type N (f) Adapter * One SMA-Type N (m) Adapter * One Type N (f) to N (f) adapter * One CD with 8510C, 8515A and 8340B Manual Set The HP 8510C vector network analyzer continues to provide the best performance to meet your new design and test challenges. With unmatched accuracy and convenience, the 8510C vector network analyzer makes broadband measurements from 45 MHz to 50 GHz in 2.4 mm coax, from 45 MHz to 110 GHz in 1.0 mm coax and from 33 GHz to 110 GHz in waveguide bands. The 8510C network analyzer measures the magnitude, phase, and group delay of two-port networks to characterize their linear behavior. The 8510C family of systems is modular. Choose the source(s), S-parameter test set(s), and test accessories to meet your measurement applications. * Thru-Reflect-Line precision two-port calibration for coaxial measurements * Line-Reflect-Match calibration for on-wafer and in-fixture applications * 45 MHz to 110 GHz frequency range * Real-time error-corrected measurements * 60 dB effective directivity and source match * 80 to 100 dBm of dynamic range available * 0.001 dB, 0.01 degree, 0.01 ns measurement resolution * Data storage on an internal 3.5 disk drive or data output to an HP-IB or serial (RS-232) plotter or printer * Four S-parameter color display * Modular to configure to your needs The HP 8515A S-parameter Test Set architecture is ideal for measuring two port devices where it is not convenient to reverse the device to measure the reverse parameters, or for networks that need to be adjusted while being measured with full error-correction employed. * Measure all four S-parameters of a two-port device with a single connection * 45 MHz or 26.5 GHz frequency range * Test ports compatible with any connector in the 3.5 mm family * Integrated, four-channel frequency converter * Two 90-dB step attenuators for changing the incident power level at the test port * Two bias networks for applying dc bias to the test port center conductor in active device test applications The HP 8340B Synthesized Sweep Generator combines the performance of a synthesizer and broadband sweep oscillator in one unit fully controlled via the HP-IB bus. It is ideal for both manual and automated testing applications. * Frequency Range: 10 MHz to 26.5 Ghz with 1 to 4 Hz resolution * Calibrated output: +10 dBm to -110 dBm * Very low spurious and phase noise * Provides Pulse, Amplitude, and Frequency Modulation * Also functions as complete analog sweeper. * Sweep range from 100 Hz to 26.5 GHz. * Output Connector is APC-3.5 Male. * Our hours of operation are M-F, 10-5PM Pacific Standard Time. Phone: Fax: |
