Up
|
Information - Questions? Call Ask for Chip or Trip The Agilent 83430A is a SDH/SONET compliant transmitter designed for evaluating the performance of high-speed TDM (time division multiplexed) and WDM (wavelength division multiplexed) optical receivers and systems. It can be used for SDH/SONET “STM-0/OC-1 (51.84 Mb/s) through STM-16/OC-48 (2.488 Gb/s) testing. With the 83430A and 83446A, Agilent Technologies offers complete optical parametric test systems for test needs up to 2.5 Gb/s. A complete high performance optical parametric test system consists of the Agilent 86130A Error Performance Analyzer with the 83430A Lightwave Digital Source and the 83446A Lightwave Clock/Data Receiver. Measurements such as optical receiver sensitivity and dispersion power penalty of single-mode fiber can be made using such a system. The 83430A can be combined with the 86100B Infiniium Digital Communications Analyzer to provide transceiver waveform testing such as filtered conformance mask testing, extinction ratio and eye-diagram measurements. This unit supports the following: This unit has the following specifications: * Maximum Input Leve:l 2 Volts pk-pk * Bit Rate: 50 to 2500 Mb/s * Pulse Pattern: 1 40 to 60% ones density * Polarity: Non-inverting * Input Level: 0.7 to 1.5 Volts pk-pk * Digital Threshold Adjustment Range: +/- 0.2 Volts * 0.1 to 1.0 GHz: 12 dB * 1.0 to 2.0 GHz: 8.5 dB * 2.0 to 2.5 GHz: 6 dB * Maximum Input Level: –4.5 to 0 Volts * Bit Rate: DC to 2500 Mb/s * Pulse Pattern: 0 to 100% ones density * Polarity: Non-inverting * Input Level: –1.7 V low, –0.9 V high (ECL levels) * Digital Threshold Adjustment Range: +/- 0.2 Volts * Impedance: 50 ohms to –2 V DC * 0.1 to 1.0 GHz: 12 dB * 1.0 to 2.0 GHz: 8.5 dB * 2.0 to 2.5 GHz: 6 dB * Maximum Input Level: 2 Volts pk-pk * Bit Rate: 0.1 to 2500 MHz * Input Level: 2 Volts pk-pk maximum * 0.1 to 1.0 GHz: 12 dB * 1.0 to 2.0 GHz: 9 dB * 2.0 to 2.5 GHz: 6 dB * Wavelength Adjustment Range: +/- 1.25 nm (+/- 1.8 nm typical) * Extinction Ratio: 10 dB +/- 1 dB * Bias/Extinction Ratio Adjustment Range: From less than 8.2 dB to greater than 13 dB * Peak Coupled Power: (Digital mode) 1.3 mW minimum (+ 1 dBm) * Average Coupled Power: (Analog mode) 0.63 mW minimum (–2 .0 dBm) * Relative Intensity Noise: (RIN) @ 1 GHz –145 dB/Hz * Spectral Width: 0.3 nm maximum at –3 dB, 1 nm maximum at –20 dB * Dispersion Power Penalty: < 2.0 dB * Side-mode Suppression Ratio: 33 dB minimum * Jitter Generation: 0.05 maximum UI pk-pk 0.005 maximum UI rms * Eye Mask Performance: Conforms to Bellcore GR-253 and ITU-T G.957 at OC-1, STM-1/OC-3, STM-4/OC-12, STM-16/OC-48 * Input Connectors: Type N female * Optical Interface: Diamond HMS-10 with universal interface adapter * Connector Interface: FC/PC standard * Output Fiber: 9/125 um, single-mode This unit is related to the following products: * Agilent 83446A Lightwave Clock/Data Receiver * Agilent 86100A\B\C Infiniium Digital Communications Analyzer * Agilent 83440B/C/D Lightwave Converters * Agilent 87441A/B/C/D SONET/SDH Filters * Agilent 8156A Optical Attenuator * Agilent 11890A Lightwave Directional Coupler * Agilent 11982A Amplified Lightwave Converter * Agilent 10086A ECL Terminator * Agilent 86130A BitAlyzer Error Performance Analyzer * Agilent 71501D Jitter Analysis System This unit has an optical output at 1550.4 nm. This item is in excellent condition, working perfectly, and comes with a 14 Day Guarantee against DOA. Oversized Pacakges: Freight Carrier If you have any questions, e-mail me. |