Up
|
The data acquisition board is not only difficult to install, but also is easy to be interrupted by internal surroundings of cabinet. GAO 4512U 100k-12bit-16CH Portable Data Acquisition Instrument can easily achieve multi-point data acquisition with low cost and high reliability. * Auto calibrate zero and channel gain * The acquisition depth of each channel up to 1M samples * USB2.0 interface: High transfer rate * Easy to install and configure, hot-pluggable, automatically configure by system * Integrated with 16-channel parallel synchronous acquisition, and expanded to 256 full-synchronized channels * High A/D resolution up to 12bits * Parallel data acquisition for more channels * Time-phase-sensitive acquisition * Sampling Rate (sps): 1k～100k * Input channel: Parallel synchronous 16 channels * Input impedance: 1MΩ//25pF * Phase difference between channels: <1(10kHz) * Analog input: 100mV to 100V * Bandwidth of input signal: DC: 0～30kHz AC: 0.2～30kHz * Memory depth of each channel (samples): 1M/CH (extension to 2M/CH) * Triggering mode: manual, external and internal triggering, in which, internal triggering can be divided into triggering of rising edge and falling edge with adjustable triggering level. * Interface: USB interface, hot plug, plug-and-play, simple configuration * Volume: 191U standard chassis * Pre-panel: power switch and indicator light which display acquisition state of channels * Post-panel: provides cascading interface of instrument * Provide DEMO source code under common development platforms and technical support for development * Operating Temperature: 0℃ to 40℃ * Storage Temperature: -40℃ to 60℃ * Relative Humidity: 40℃ 20 to 90% (no condensation) You must have a return authorization number to return your product. Please contact to obtain an authorization number, which shall be valid for 14 days after issued. This product is covered by a warranty of 12 months. You must have a return authorization number to service your product. Please contact to obtain an authorization number. |