Up
|
POSIRATIO MIX METER RESIN DISPENSER MODEL PRMF This is a fully functional equipment that was recently rebuilt and tested and used to do a short run project. This machine was purchased used and completely cleaned, replaced all rubber seals. Avoid the mess and hassle of hand mixing and pouring potting compounds or adhesives. Just attach a new static mix nozzle at the beginning of the run and the machine is ready for production. No need to clean the machine since the components are kept separate until it is automatically mixed in the static tube mixer. Replace the nozzle and it is ready to run again. DISPOSABLE STATIC MIXERS AVAILABLE AT: http://www.ecrater.com/product.php?pid=70315 Reduce air entrapment of the potting compound or adhesive with the use of a static mixer. Entrapped air bubbles in the mixture will cause structural weakness or potting compound failures for high voltage potting applications. Excellent for short runs or continuous productions SHOT SIZE CAN BE ADJUSTED FROM 1 TO 25 CUBIC CENTIMETER OF MIXED RESIN PER SHOT. (0.85 fluid ounce per shot) Cycle time can be adjusted to deliver the mixed resin from slow to fast multiple shots. Use the built-in PROGRAMABLE LOGIC CONTROL (PLC) for shot counts, fine mix metering control and other programmable features Or use the easy-to-adjust analog controls in the front panel (Manual available at http://www.liquidcontrol.com/products/posiratio.html ) THIS MACHINE WILL MIX METER THIN OR LOW VISCOSITY RESINS TO THIXOTROPIC GELS ACCURATELY. ALL IS NEEDED IS A STEADY SUPPLY OF RESIN AND CURING AGENT AND A LOW COST STATIC MIXER AS AN ADDED BONUS, POLYMER PRODUCTS WILL CUSTOM FORMULATE AN EPOXY BASED RESIN SPECIFIC TO YOUR NEEDS AND THE CAPABILITES OF THIS MACHINE |