Up
|
Corning Glass Vacuum Distillation Unit * Glass Construction with steel support tower * Works with a cooling tower for condensation * Two complete units available but one has a broken elbow and is being sold as a spare - Elbow replacement would allow it to work. * Both units taken out of service in working order * Both units have the pumps included * Both units have original controls * Both units have the heat tank * Both units have the condensers * No cooling towers with units but we could provide a quote for them * Both units should have all gaskets replaced and controls updated as necessary. Complete working unit - $16,500.00 Second unit as spare - $8,500.00 I spoke to Eric Mosen at Di Dietrich and he has the project folder for these units and can speak about their design and capability. His number is . His email is . These units were sold to Stanly Tool Works in CT and taken out of service in 1999. They have on file that they sold these 2 units - and a third in S Carolina. That plant closed as well and no one knows where that one went. If you want a detailed description of these units, you can find them on their web site today. Di Dietrich will sell parts and engineering support for systems if you need it. They will also work with you on fitness for use for these 2 units. These units currently have Columbium vacuum tubes in them - big bucks, but they said you can replace them with glass or what ever you need - if you need to. The columbium was used for Chromium plating solution evaporation. You will have to discuss the evaporation rate with the factory as I did and they agreed that plating fluids are difficult and an alcohol based solution would have much different rates. Go to www.ddsinc.com for the home page, select Engineered Systems from the upper right drop down and then select Plating Chemical Recovery then select De Dietrich PCR Vacuum Evaporator For Plating Chemical Recovery - Functional Description. Here is a link to the page I am talking about: http://www.ddpsinc.com/Recovery.htm. So, I have operation manuals, OEM support and 2 units. Below is the data on the Di Diettich web site or . The De Dietrich evaporator is the fully automatic solution to your recovery needs. It will let you devote your attention to plating operations while cutting costs and recovering wasted chemicals. In fact, the De Dietrich evaporator is designed to reduce wasted time via.. Fully automatic one-button activation - for easy startup Fully operational in five minutes Automatic concentration control - for automatic delivery of precise bath concentration Self monitoring - for easy trouble free operation One-button shutdown - for quick and easy termination Reduced waste disposal and operating costs Eliminate air discharge permit Minimize or Eliminate Liquid Discharge Save 50-90% on plating chemical costs Save over 90% on destruct chemical costs De Dietrich has a broad range of Plating Bath Recovery Experience including: Single Nickel Baths Watts, S. Br. or Bright Cyanide Baths - Brass, Copper, Cadmium, Silver, Zinc The following links are on the Di Dietrich web site: Nickel Plating Bath Recovery by Vacuum Evaporation #TI-NI Chrome Etch Bath Recovery by Vacuum Evaporation #TI-CRE Chrome Plating Bath Recovery by Vacuum Evaporation #TI-CR Cyanide Plating Bath Recovery by Vacuum Evaporation #TI-CN Electroplating Rinse Practice and Evaporator Sizing #TI-RP De Dietrich PCR Vacuum Evaporator For Plating Chemical Recovery - Functional Description Multi-stage Counter-current Rinsing Fundamentals Of Evaporation And Evaporators For Plating Bath And Rinse Water Recovery In The Surface Finishing Industry For Plating Bath and Rinse Water Recovery |
