Up
|
CDS Analytical Pyroprobe 2000 Pyrolyzer Programmable in 1°C increments to 1400°C Pulse Mode - Settable from 0.01°C/ms to 20°C/ms (10°C/sec to 20,000°C/sec); Programmed Mode - 0.01°C/min. to 1000°C/min. or 0.01°C/sec to 1000°C/sec Selectable to 1000 seconds in increments of 0.01 seconds or to 1000 minutes in intervals of 0.01 minutes Selectable from ambient to 350°C Dry - For removing solvents before pyrolysis (user selectable parameters) Clean - For removing residue between runs (user selectable parameters) Up to 5 steps (initial temperature, ramp, and final temperature for both probe and interface programmable in each step) Probe and interface are individually programmable 9 methods of 5 steps each may be stored for later recall http://www.cdsanalytical.com/products/p2000.htm This is part of a lot purchased from a university, All equipment was sold to us as most likely still working, however, AS-IS. We have no way to test most of these items and as such, all of these items are being re-sold AS-IS. 75 From Atlanta, Anderson and Augusta eMail contact of how you intend to pay is required within 3 days. The overwhelming majority of what we sell is electronic and was working when removed from service. Please understand that we do not have the equipment, facilities, or time to fully test every item. Unless otherwise stated, ALL items are sold AS-IS. If we say the item works, then it was tested to the best of our ability, All items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We use a multiple warehouse system to store our inventory and consignments. We do try to make it faster, however, It is not uncommon for an Item to take two weeks Please give at LEAST 48 hours for us to respond to questions or any eMail (except weekends when we try not to go online) We run a store, warehouses, have families and enjoy natural light. Listing created with eLister 2.6.2 for Macintosh from Black Magik Software. |