Up
|
THIS IS A USED DRILL PRESS I SPECIALLY BUILT USING AN ARO SELF FEEDING AND ADJUSTABLE AUTOMATIC CYCLING PNEUMATIC DRILL. IT HAS A 33B JACOBS 5/64" TO 1/2" CAPACITY DRILL CHUCK MOUNTED. IT RUNS AT 1200 RPM AND HAS A 1" ADJUSTABLE STROKE. THIS DRILL PRESS CYCLES AUTOMATICALLY BY DEPRESSING (2) SWITCHES, ONE ON EACH SIDE. IT THEN STARTS TO SPIN AND WITH THE ADJUSTABLE FEED RATE IT COMES DOWN TO THE ADJUSTABLE DEPTH STOP AND THEN COMES BACK UP AND SHUTS OFF AUTOMATICALLY UNTIL CYCLE STARTS AGAIN. |
