Up
|
16cf N2 purged 12KW Despatch Advanced Microtechnology Optimum 16000 Burn-In Testing Oven +1500 amps of Power Ten at 0 to 10 & 20 volt Supply. The oven chamber is on the left in the image above. The high current power supplies are in the lower right. The tester personality cards for the units under test fit in the back behind the oven chamber and connect to the boards in the chamber through the back wall. Despatch made the oven but Advanced Microtechnology put the system together. See the following link for the factory web page related to Burn-In systems (not specific to this unit). Advanced Microtechnology, Inc. This sections shows the oven controls, including the chart recorder. System control was provided by a PC (we did not get it) connected to electronics in the back that also connected to the system status panel above the CRT shown above. The stack of high-current Power Ten Power supplies is shown below. 2 are 0 to 20 volts at up to 125 amps. 1 is 0 to 10 volts at up to 500 amps. The 4th is 0 to 10 volts at up to 750 amps. There is about $10,000 in power supply value here. We have confirmed that each of these power supplies powers up. These were some of the best power supplies in the industry. Elgar bought out other good power supply companies then discontinued their products in favor of Elgar branded items. However, there are numerous repair facilities that still support Power Ten products. The pair of Power Ten Inc. 4500C-20125. See the following link for the manual. 4500%20Series%20Operation%20and%20Maintenance%20Manual The Power Ten Inc. 4600C-10599 See the following link for the manual. 4600%20Series%20Operation%20and%20Maintenance%20Manual The Power Ten Inc. 4700C-10750 See the following link for the manual. 4700%20Series%20Operation%20and%20Maintenance%20Manual This listing includes a quantity of testing boards, spare parts and a lot of documentation. The chamber is about 2 feet by 2 feet by 4 feet or 16 cubic feet. Overall, this unit is rather large at 65 by 71 by 92 inches tall. The back section is where the personality test boards go for the items being tested in the chamber through the wall. As you can see, there are some that come with the unit along with a number of spare parts. The section below is the back of the system control and high current power supply rack. Additional similar items maybe listed separately or available on request. Might be just what you need for your really serious PCB burn in testing application. Condition looks very good used as shown above. We have confirmed operation of big power supplies and oven function. The only thing we know that is missing is the PC (and interface boards it contained) that coordinated operation of this system (you would want a more up-to-date PC and boards anyway). Click cavlon99 all to see items from the past 30 days-might be something you need that did not sell. Click here to check for last minute updates and cavlon99 news Listing description is correct to the best of our knowledge This item may be subject to government export/import restrictions. Click the following link for rules regarding sale/resale of US government property Sale of Government Property. |