Up
|
TSUGAMI FA45 6-AXIS CNC TURNING CENTER WITH C-AXIS, LIVE TOOLING & Y-AXIS With optional collet chucks 45mm No. of turret stations: T1: 16, T: 28 High-speed version 50 to 5,000 RPM Low-speed version 40 to 3,550 RPM High-speed version 8.77 kgf-m/1,666 RPM Low-speed version 12.33 kgf-m/1,183 RPM Maximum chucking diameter 41mm For ID machining 25mm (diameter) For tool spindles 3.7 / 2.2 kW Machine dimensions( width x depth x height) 3,300mm x 2,200mm x 1,900mm Required electrical capacity 45 KVA Type of NC system Fanuc Series OT Model A (2 units) No. of controlled axes 6 (X1, X2, Y, Z1, Z2, & C) Minimum setting increment For all axes except C-axis (diametrical designation for X axis) 0.001mm Tape codes EIA RS-244 & ISP 840 C-Axis 7,200 deg./min. (20 RPM) Interpolation Linear & Circular Feedrate commands in mm/rev., mm/min or deg/min Thread leads 0.0001 to 30.000mm Spindle functions 4-Digit S-Code Coolant surface speed control Standard No. of tool offsets 48 (front:16, rear: 32) Tape memory length 20m (CMOS memory) Reference point return Manual & automatic Multiple fixed cycles Standard Stored stroke check #1 Standard Tool point radius compensation For X and Z-axis Chuck pressure adjustment device 1 High performance 0.001 deg. C-Axis control 1 Back-end working tool station 1 Set Hydraulic cylinder for hollow chuck 1 Automatic lubrication unit 1 Set Iemca magazine load bar feeder TAL65/12 AML S/N 89020312 16 Station turret with sub spindle and 7 additional live tool stations 4 Position back working station |