80 ton ironworker uni hydro punch 24" bar shear angle

UpUp


Subject: 80 ton ironworker uni hydro punch 24" bar shear angle
This is the unit you have been looking for.
New industrial machine at a GREAT Price!!
24" BAR SHEAR BLADE (4 sided blades for extra long life)
1 ROUND PUNCH AND DIE -YOUR CHOICE OF SIZE UP TO 1" O.D. DIAMETER
L & 150 SERIES PUNCH AND DIE ADAPTOR KIT-read about the advantage of this below
- Open throat punch has 80-ton capacity
- 24" bar shear with 4-sided blades can miter angle iron to 4" x 4" x 1/2"
- Bar shear hold down can be fixed or adjustable
- Variable stroke control
- Magnetic starter for safety
- Electric foot control
punch and die adaptor kit
NOTE: Save Money and Hassle: Our 66-24 uses 1 stripper, 1 Die Stand and 2 Adaptors to easily accept a punch and Die range from 1/8" to 2 1/4" round Diameter.
Gone is the hassle found in our industry that usually requires 3 different strippers, 3 die stands, odd punch lengths and alot of down time in tooling changeover and an additional cost of about $2000 for these items. Don't get stuck with the ability to only punch a small hole before ordering. Call Us where your puchase is more complete!
6", 9", 14", 18", 24" capacity
6", 9", 14", 18", 24" capacity
6", 9", 14", 18", 24" capacity
6", 9", 14", 18", 24" capacity
6", 9", 14", 18", 24" capacity
6", 9", 14", 18", 24" capacity
Contact us at and we will be happy to help you. Or call
1. You can choose the size that's right for you
Sixteen ironworkers and four sizes of plate shears are available. No need to settle for an under-powered unit or to waste money on an oversized purchase.
2. You can shear metal with less deformation
Our "guillotine" action cuts cleaner and more evenly for the full length of the cut. Other machines using "scissors" action loses force at the far end of the blades and causes greater metal deformation.
Cut, bend, punch, notch, shear flat, round, angle, and channel iron - all easily, quickly and safely. If you have special requirements, we can fabricate the custom tooling you need.
Heavy metal working can be dangerous, so safety is always on our mind as we design and build our ironworkers. Shield, warning lights, safety switches, accessory mounting methods and other ironworker features are all in full compliance with current OSHA and other standards.
6. Nobody's done it better or longer than the 3 generations of The Dvorak Family
Joe Dvorak invented the first hydraulic ironworker in 1949 known as "The Dvorak Ironworker" which was a scissors type machine.
Jim Dvorak invented the Uni-Hydro Ironworker in 1974 with his own major patents which is a guillotine type machine. Jim Dvorak's 7 United States Patents & 30 plus foreign patents directly relating to the metal shearing industry verifies that he is the true "Champion of our Industry"
Any questions contact me at
Accessories that can be purchased seperately
Punch nut wrench for L series or 150, 250 and 350 series punch nut
- Punch rack holds 30 sets of L series punches
- Bar shear stop for production shearing up to 24" lengths
- Grease bank allows lubricating without removing machine covers
- Bin for collecting steel dropping from bar shear
- Punch and die sets for 150 and 250 series
- 350 series for punching over 2-1/4" round
(specify type and thickness of material to be punched)
- 350 series stripper for punching over 2-1/4" round
- Offset die stand for punching close to the web on angle iron