Up
|
Highly Ported Large 77 cubic foot As-New Stainless Steel Vacuum Chamber Bell Jar with ~46 ports on swivel-wheel dolly. This big husky all-stainless steel vacuum chamber has more ports than most of us could ever think of what to do with. construction is generally from 1", 3/4" and 1/2" stainless with the curved wall being about 1/4" thick (and braced as shown in various images). We did not get any doors or port covers other than what are shown. We estimate this weighs about 2500 pounds. The 18" diameter end-port in the image above is offset to the back. This chamber is about 50" in diameter and 68" long. My math says this is about 77 cubic feet. The side access doors openings are about 54 by 20". The rear port opening is about 18" diameter. There appear to be 5 precision registration mounting or support pedestals on the bottom of the chamber We counted a total of 46 ports, including the big side openings and the ends. The small ones are about 2". The ones down the top center are a bit over 4". The ones down the top-sides are a bit under 6" diameter. Some of the smaller ports are flanged inside and some flanged outside. The bottom ports are shown in the image above and below. Other similar items may be available listed separately or on request. Might be just what you need for your big vacuum chamber with a huge number of ports application. excellent as shown-No particular signs of haveing been used. Interior does appear a bit pickled or anodized but looks like it should brush up bright without any problem. Click cavlon99 all to see items from the past 30 days-might be something you need that did not sell. Click here to check for last minute updates and cavlon99 news recommended by vacuum-guide.com This item may be subject to government export/import restrictions. Click the following link for rules regarding sale/resale of US government property Sale of Government Property. |