Machine is for sale locally and could be pulled from store at moments notice!!!
Metal Man 555 5" K-Style Seamless Gutter Machine Englert’s Series 555 5" K-Style Seamless Gutter Machine’s separate polyurethane drive roller system drives all materials up to 24 gauge steel through the machine with ease. The polyurethane drive rollers are guaranteed for life against separation from the drive hubs under normal operating conditions. Chromed free-floating forming rollers eliminate the excessive pressure common with conventional driven forming rollers. Metal Man rollers allow a much wider variety of materials to be run through the machine, with “little or no adjustments, making the 555 Gutter Machine the most advanced and versatile machine on the market. Double rack and pinion shear and hardened tool steel cutting dies ensure long life and easy cutting of all materials up to 24 gauge steel. Unlike other gutter roll formers, the 555 Gutter Machine does not require material to be left in the machine to prevent damage and misalignment when moving from job to job. The Metal Man 555 ensures less wasted material and more profit – as much as $1,000/year, based on only one move per day! FEATURES * Free floating chromed forming rollers * Forward pulling mechanical guillotine utilizing double rack and pinion shear * Forward and reversing switch with weatherproofed double outlet auxiliary power source and emergency stop switch * Two independently mounted, easily reversible reel stands, with two adjustable-width reels * Limited 1 year parts warranty * Fits into the back of an 8' (2.44 m) pick up truck * Runs aluminum, copper, painted or galvanized steel * SPECIFICATIONS Power: Length – 95 ½" (2.42 m) Width – 24" (.61 m) Height – 43-3/16" (1.09 m) to top of reel Weight – approximately 1,000 lbs. (453.59 kg) 1 HP, 110V, 1 Phase TEFC motor, 13.6 AMP Dedicated powered polyurethane drive rollers via chains and sprockets Shear: Mechanical guillotine using double rack and pinion system Speed: Approximately 45' (13.7 m) per minute Controls: Reversing drum switch with entry and exit end. Emergency stop switches. Forming: Factory-set free floating chromed forming rollers Frame Construction: Welded tubular steel frame Materials Formed: 11 ¾" (298.4 mm) to 12 3/8" (314.33 mm) wide Steel – 24 gauge painted, galvanized and aluminized steel Aluminum – .032 (.81 mm) Copper – 20 oz. ¾ hard TCSII – 28 gauge * TCSII is a registered trademark of the Follansbee Steel Corporation