Up
|
#17A GLEASON HYPOID BEVEL GEAR TESTING MACHINE New 1951, Serial No. 27420, Model 17A Hydraulic Work Chucking Cylinders On Pinion & Gear Spindles, (Less Draw-In Bar & Nuts) Brake Spindle (2-19/64" Bore Dia. Large End) Adjustable Drive Pinion Spindle (3-29/32" Bore Dia. Large End) w/Crank Handle & Graduated Dial Max Offset Gear Spindle Above Or Below Center Of Pinion Spindle...... 3.5"/(88.9mm) Max Distance From Center Gear Spindle To Nose Of Pinion Spindle.............. 12"/(304.8mm) Min Distance From Center Gear Spindle To Nose Of Pinion Spindle.............. 6"/(152.4mm) Max Distance From Center Of Pinion Spindle To Nose Of Gear Spindle: w/Lapping Guard Cover Closed........................... 7.75"/(196.85mm) Min Distance From Center Of Pinion Spindle To Nose Of Gear Spindle................ 4.13"/(104.8mm) Max Diameter Of Gear w/"Zero" Offset Of Gear Spindle................................ 20"/(508mm) Main Motor, Horsepower/RPM............. 5 HP/1670 RPM Hydraulic Motor, Horsepower/RPM........ 3/4 HP/1745 RPM Machine Dimensions (Approx.)........... 60"x 73"x 60" Machine Net Weight..................... 5,300 Lbs. NOTE: Machine Suitable For The Testing Of Straight Bevel, Spiral Bevel, And Hypoid Gears w/Shafts Intersecting At 90-Degrees, With Capacity Of Test Gears Up To 20" (508mm) Pitch Diameter. RUNNING 440 VOLTS. EVERYTHING SEEMS TO BE WORKING. PINION SPINDLE: BRAKE SPINDLE: Radial Runout .0001 Radial Runout .00005 Axial Runout .00005 Axial Runout .00005 Draw .009 Draw .006 Machine is equipped with Hydraulic Chucking, Meshing PRICE: F.O.B. OUR WAREHOUSE........... $24,500.00 All machines/equipment subject to prior sale. |