17" engine lathe, acer 1740G dynamic series 7

UpUp


Subject: 17" engine lathe, acer 1740G dynamic series 7
Used Machinery and Machine ToolsUsed MachineryUsed Machine ToolsThousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy
* Manual Lathes, Mills, Drills, Saws
* Grinders, Hones, Finishing
* Ovens, Furnaces & Environmental
17" ENGINE LATHE, Acer 1740G Dynamic Series 7
17" ENGINE LATHE, Acer 1740G Dynamic Series 7
"NEW" ACER High Speed Precision Engine Lathe
MODEL: Dynamic Series - E-Lathe 1740G
Swing Over Gap (gap type only): 26"
Swing Over Cross Slide: 9-5/8"
Spindle Speeds: 50-1800 RPM (12 steps)
Max Size Cutting Tool: 1" x 1"
Pitch of Leadscrew: 35 Diameter, 4 TPI
Metric Pitch Threads: 0.5 - 7mm/pitch (22 kinds)
Inch Pitch Threads: 4-56 TPI (36 kinds)
Module Pitch Threads (optional): 0.5-3.5 MP (12 kinds)
Diametral Pitch Threads (optional): 8-56 DP (21 kinds)
Range of Longitudinal Feeds: 0.002" - 0.028"/rev. 0.05 -0.70mm/rev.
Range of Cross Feeds: 0.001"-0.014"/rev. 0.025 - 0.35mm/rev.
Main Drive Motor: 7-1/2 hp 220/440 Volt 3 Phase
Packing Dimensions: 88" x 41" x 67"
Headstock's rigidity and durability are derived from high tensile
A uniquely designed gear box offers a comprehensive range of
inch and metric threads without changing gears.
Simple laid-out electric cabinet is easy to maintain and easy to fix.
Saddle is coated with Turcite-B to provide wear resistance.
Three point support on the spindle is the key to heavy cutting.
Triangular ribbed bed with annealing process on the casting allows
no deformation to occur on the slideways.
A 2-1/4" diametered quill, graduated in inch and metric scales, is
made from low carbon steel (SCM4), and it is hardened and
Electro-trochoid pump forces lubrication oil to all running parts
Oil bathed cross lead screw (optional).
Output shaft of the gear box is designed with a safety pin to
Power disconnecting limit switch.
Drip-proof 7.5 HP spindle motor.
Mechanical drum type brake is easy to adjust and maintain.
Hardened & ground bedways at Rockwell C 55.
Hardened & ground cross slideways.
Saddle lock device for heavy cutting.
Triangular bed web for rigidity.
Oil bathed longitudinal lead screw.
Forward/stop/reverse lever with safety device.
Machine bed with FC-30 casting iron.
9" 3 Jaw Adapter Plate & 12" 4 Jaw Adapter Plate
Automatic Longitudinal Multiple Feed Stop
Chuck Guard with Emergency Stop
Optional Accessories (call for pricing):
Aloris or Dorial Tool Posts and Holders
5C Lever Operated Collet Closer
5C Handwheel Type Collet Closer
Newall or Sony 2 Axis Digital Readouts
Machine Location: HARRISON, NJ
Click Here For More Acer Machines
Click Here For More Toolroom Machines - NEW LATHES(s)
Call Kori at ext 7555
Call Alex at ext 7613
Finance This Equipment For Your Business - Click Here
Finance Equipment For Your Business - Click Here
* Machinery Values is one of the world's largest machinery dealers, in business since 1971.
* New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines.
* Most items in our store are located in our warehouse in Harrison, New Jersey - about 9 miles from New York City. You may inspect any item prior to purchase, under power in most cases, simply by calling and arranging an inspection. There is no charge for this.
Summary of My Selling Policies
Machinery, Tooling and Accessories used in manufacturing are usually exempt from sales tax in our state (New Jersey). A sales tax exemption certificate may be required if you are a New Jersey company. Equipment purchased for personal use is subject to sales tax if you are a New Jersey resident.
Read my policies on my SquareTrade Seal