Up
|
Used Machinery and Machine ToolsUsed MachineryUsed Machine ToolsThousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy * Manual Lathes, Mills, Drills, Saws * Grinders, Hones, Finishing * Ovens, Furnaces & Environmental 14" COLD SAW, Scotchman CPO 350 NF PKPD High- 14" COLD SAW, Scotchman CPO 350 NF PKPD High- MODEL CPO-350 NF PKPD SEMI-AUTOMATIC COLD SAW HIGH SPEED MODEL FOR NON-METALLIC MATERIALS Pneumatic Power Down Feed with Electric Controls Separate Feed Control of both Feed Rate and Feed Pressure Power Double Self-Centering Vise Assures Burr-Free Cuts Miter Capabilities 135 degrees, 90 degrees Left and 45 degrees Right Miter Locking Devise Stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right Double Reduction, Hardened and Ground Worm and Wheel Gear Box Worm Wheel of Top Quality Bronze 7 Gallon Coolant Tank with Pump One 12-1/2" Diameter (315 mm) HSS Blade One Gallon Concentrated Coolant 230 or 460 Volt /3 Phase Electrics (must specify voltage) Cutting Speeds: 1,500 RPM & 3,000 RPM Motor Rate: Low RPM: 3 HP - High RPM: 3.8 HP Factory Wired: Specify 208 3ph / 230 3 ph / 460 3 ph / 575 3 ph 60 hz Tubing Maximum Capacities for 90 Degrees Tubing Maximum Capacities for 45 Degrees Solid Maximum Capacities for 90 Degrees Solid Maximum Capacities for 45 Degrees Height Not Including Handle: 56-1/4" Height From Floor To Vise: 37-7/16" Machine Location: HARRISON, NJ Click Here For More Scotchman Machines Call Kori at ext 7555 Call Alex at ext 7613 Finance This Equipment For Your Business - Click Here Finance Equipment For Your Business - Click Here * Machinery Values is one of the world's largest machinery dealers, in business since 1971. * New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines. * Most items in our store are located in our warehouse in Harrison, New Jersey - about 9 miles from New York City. You may inspect any item prior to purchase, under power in most cases, simply by calling and arranging an inspection. There is no charge for this. Summary of My Selling Policies Machinery, Tooling and Accessories used in manufacturing are usually exempt from sales tax in our state (New Jersey). A sales tax exemption certificate may be required if you are a New Jersey company. Equipment purchased for personal use is subject to sales tax if you are a New Jersey resident. Read my policies on my SquareTrade Seal |