Welcome to Select Machine Tool SWING OVER TABLE ........................... 12-1/4" DISTANCE BETWEEN TAILSTOCKS ..................... 32" TABLE WORKING SURFACE .............. 5-1/4" X 37-1/4" SUB TABLE .................................. 8" X 48" LONGITUDINAL TABLE TRAVERSE ..................... 20" TABLE FEED K.O. LEE B6062 SERIES UNIVERSAL TOOL & PER REV. OF HANDWHEEL: FAST .................................... 2-13/16" SLOW .................................... 9/16" CROSS FEED ....................................... 8" FEED PER REV. OF HANDWHEEL (.001" GRAD.) ..... 0.100" VERTICAL MOVEMENT OF COLUMN ................. 10-1/2" FEED PER REV. OF HANDWHEEL (.001" GRAD.)...... 0.050" COLUMN DIAMETER .................................. 6" MINIMUM/MAXIMUM DISTANCE CENTERLINE OF WHEEL SHAFT TO TABLE ................... 5-3/8" / 15-1/4" MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE OF STRAIGHT WHEEL; DOVETAIL SLIDE NOT EXTENDED, SPINDLE 90 DEG. TO TABLE ......... 4-5/8" MAXIMUM DISTANCE FROM COLUMN TO OUTSIDE OF STRAIGHT WHEEL; DOVETAIL SLIDE EXTENDED, SPINDLE 90 DEGREES TO TABLE ............... 9- 3/4" TABLE SWIVELS (CALIBRATION: 3" PER FT., 15 DEG. EITHER SIDE OF CENTER) ......... 225 DEGREES WHEEL HEAD SWIVEL ........................ 360 DEGREES MAXIMUM I.D. DEPTH, HOLE SIZE 9/32" TO 2" ..... 1-1/4" MAXIMUM CROSS FEED SURFACE GRINDING W/5" WHEEL..... 3" ( HIGH SPEED WHEELHEAD) ........... 3450 TO 17,250 RPM APPROXIMATE MACHINE WEIGHT ................. 1,318 LBS - SWIVELLING & TILTING (22 DEG. EITHER SIDE OF VERTICAL) - 1 HP MOTOR WIRED FOR 3/60/230-460 VOLT OPERATION K.O. LEE #B8043 MOTORIZED WORKHEAD DRAW BAR W/COLLET NOSE FOR #5C COLLETS PLEASE CLICK ON PICTURES TO ENLARGE If you are a Virginia resident 5% state sales tax will be added. User agrees to indemnity and hold harmless Seller of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agents to follow instructions, warnings, or recommendations available from the original manufacturer, or by failure of user to comply with Federal, State and Local laws applicable to such equipment including the Occupational Safety and Health Act of 1970. FOR ALL YOUR TOOLING AND EQUIPMENT NEEDS PLEASE VISITWWW.DOMINIONAIR.COM |