Up
|
90 DAY NO RISK SATISFACTION GUARANTEE! 10 YEAR ACRYLIC ROLLER WARRANTY! Can be configured for a "no plumbing required" installation at no additional charge! Please click here for an important message from seller! Up for sale is a factory new Fischer Industries, Inc. Futura 3000SV™ automatic x-ray film processor with acrylic rollers. This processor carries a full 1 year "bumper to bumper" parts warranty, AND BEST OF ALL, a 10 year warranty on the acrylic rollers. I can’t stress enough the importance of the 10 year acrylic roller warranty because the transport mechanism in a film processor is where all the action is, and this warranty combination insures you can count on many years of great performance. You must use the processor on a daily basis during the work week. On days where you do not develop film, please run at least a couple "clean-up" films through the processor. The processor, when not developing film, must be switched to the Standby position. This is clearly stated in the manual. Otherwise, you will lose excessive chemistry to evaporation. You must clean and service the processor every 4-6 weeks and keep a written record of the cleaning dates. Your water supply must be contaminant free. If you have poor water quality in your area, a suitable water filter must be used. The processor must be level and the racks must be squared. Fischer personnel can assist you via telephone during installation of the processor. If you are dissatisfied with something, please give us an opportunity to address your concern before you simply pack it up for return. 3000SV™ Specifications and Features The 3000SV™ provides an unparalleled combination of economy and reliability with the convenience of fully automatic x-ray film processing. bd10268_.gif (177 bytes) 90 second processing bd10268_.gif (177 bytes) Smallest processor (24" x 26") available today bd10268_.gif (177 bytes) Affordability without sacrificing features bd10268_.gif (177 bytes) Precise temperature control board from original Model E™ bd10268_.gif (177 bytes) 1 year warranty on processor, with 3 year microprocessor warranty bd10268_.gif (177 bytes) Fully automatic cycling between run and standby modes bd10268_.gif (177 bytes) Economical automatic chemical replenishment bd10268_.gif (177 bytes) Low developer level indicator light bd10268_.gif (177 bytes) Front feed and front return with light-tight cover for immediate dark room exit bd10268_.gif (177 bytes) Made in the U.S.A. bd10268_.gif (177 bytes) 7 gallon (26 liter) chemical tanks bd10268_.gif (177 bytes) Film catcher bd10268_.gif (177 bytes) Spare parts kit bd10268_.gif (177 bytes) Installation and Operating Manual bd10268_.gif (177 bytes) 15 amp service bd10268_.gif (177 bytes) 10 gallon (38 liter) chemical tanks bd10268_.gif (177 bytes) 220V, 50Hz or 60Hz bd10268_.gif (177 bytes) Thru-the-wall modification bd10268_.gif (177 bytes) Processor stand bd10268_.gif (177 bytes) Variable speed bd10268_.gif (177 bytes) In-line water filter bd10268_.gif (177 bytes) Closed loop (self-contained) system bd10268_.gif (177 bytes) Remote temperature display bd10268_.gif (177 bytes) Programmable temperature display integral to the processor bd10268_.gif (177 bytes) Chemical mixer Dry to Drop Time - 1 Film (14 x 17) Dry to Drop Time - 5 Films (14 x 17) Capacity (Films per Hour) - 14 x 17 (35cm x 44cm) Capacity (Films per Hour) - 10 x 12 (25cm x 30cm) Processing Tanks (Developer/Fixer/Water) 115VAC, 60Hz (or 220VAC, 50/60Hz) 15 Amp Service Cold water only, flow requirement is 2 quarts (1.9 liters) per minute during operation. Recommended temperature is between 35°F to 75°F (1.6°C to 23.8°C) 2 inches (5 cm) or larger and less than 12 inches (30 cm) above the floor Fits most standard silver recovery units Fits neatly into the smallest darkrooms Committed To Quality & Ethics Phone: (412) 77 XRAYS or Contact: William W. Lauver (Bill) E-Mail: Manufacturer Contact Information: Fischer Industries, Inc., The Most Cost Effective X-Ray Film Processors On The Market Today - Copyright 2002 Fischer Industries, Inc. |
