Up
|
CINCINNATI 0-12 RISE & FALL PRODUCTION MILLER Working Surface 6 ½ x 23 11/16 in. Size overall 11 1/8 x 32 7/16 in. T-Slots (# & Size) (3)-9/16 in. wide Longitudinal power (table travel) 12 in. Vertical movement of spindle carrier-hand 4 ½ in. Power (automatic) vertical movement of spindle carrier 2 ½ in. Maximum distance from center line of spindle to table 8 ½ in. Minimum distance from center line of spindle to table 1 ½ in. Distance from center line of table to face of spindle carrier 5 ¼ in. Maximum distance from spindle nose to inside of arbor support 9 ¾ in. Maximum distance from spindle carrier face to inside of arbor support 10 5/8 in. Adjustment, hand traverse 1 in. Maximum distance from spindle nose to center line of table 4 3/8 in. Minimum distance from spindle nose to center line of table 3 3/8 in. Distance from underside of center line of arbor 5 ¼ in. SPINDLE – Chrome, Nickel, Steel (National Standard Spindle End with No. 40 Series Taper Hole) Size of hole through 11/16 in. Clamping for spindle carrier Automatic, Hydraulic Number (feed rates selected with pick-off gears) 16 Standard Series ½ to 20 in./min. Optional High Series A 1 to 40 in./min. Optional High Series B 2 to 80 in./min. Spindle carrier-down only (IPM) 1 to 10 in. To table, right and left 400 in. To spindle carrier-up and down 80 in. * All items are subject to prior sale. All items are sold "AS - IS, Where - IS" and with all faults. Items are described to the best of our knowledge, however, We (Mikekandu or Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. For more information read our Frequently Asked Questions page. |