Model: D S/N: D60209
6 in. Wide x 10 in. High under a 7 in. Dia. Wheel x 18 in. long.
Vertical Travel of Wheel 10 ½ in.
Max. Distance from center of spindle to table work surface 13 ½
51 in. long x 8 in. wide with 6 in. x 19 in. work surface and 2½ in. clamping surface of each end. Three Tee slots 9/16 in. wide
1 H.P. 3600 RPM totally enclosed Drive Motor.
7 in. Dia. x ½ in. face x 1 ½ in. Hole straight sides.
Longitudinal: Hand operated, with approximately 2 in. of table movement per revolution of handwheel.
Transverse: Hand operated with two feed rates with reset dial handwheel graduated in .001 in. with .200 in. per rev. Micrometer graduated in .0001 in. with .005 in. per revolution.
Vertical: Hand operated with two feed rates Handwheel graduated in .001 in. with Reset Dial .100 in. per rev. Micrometer gradated in .0001 in. with .005 in. per revolution.
Floor Space L x D x H 71 3/8 x 44 ½ x 66 9/16 in.
B&S Wide Pole Chuck 6 x 18 in.
* All items are subject to prior sale.
All items are sold "AS - IS, Where - IS" and with all faults. Items are described to the best of our knowledge, however, We (Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item.
For more information read our Frequently Asked Questions page.