Quinn process equipment liquid-solid separation unit

UpUp


Subject: Quinn process equipment liquid-solid separation unit
QUINN PROCESS EQUIPMENT Liquid-Solid separation unit.
Includes 3' tilting pan filter, 4' mixer thickener and ~100 gallon pressure tank. 1999 MFG date.
Click the following link for the factory website.
Welcome to Quinn Process Equipment Co.
This system was designed to separate liquid from solids.
The images that follow are detail of the 4' diameter thickener/mixer unit
The image above and the label below are of the speed reducer attached to the top end of the stirring blade shaft.
The gear reduction on the drive motor is labeled "WINSMITH SPEED REDUCER MAXIMIZER 917"
The motor controls are shown below.
The pressure tank is about 30" in diameter and 48" tall.
The serial numbers on all three items are the same.
The images that follow are detail of the 3' tilting pan filter.
The thickener mixer is a bit over 48" in diameter and about 30" deep. There is a shallow taper to the majority of the bottom with a much steeper cone in the very center, leading to the drain.
The pan filter is 36" wide, about 45" back to lip and 9" deep to the screen.
Similar items may be available listed separately or on request.
Might be just what you need for your solid/liquid separation application.
Condition looks looks very good, maybe never used but has sat out such that bare steel has surface rust.
Sold as-is-where-is. What you see is what you get. We are in the Desert Southwest so items may need dusting/cleaning when they arrive.
Click cavlon99 all to see items from the past 30 days-might be something you need that did not sell.
Click here to check for last minute updates and cavlon99 news.
This item may be subject to government export/import restrictions. Click the following link for rules regarding sale/resale of US government property Sale of Government Property.