Up
|
USED-LIKE NEW ORIEL INSTRUMENTS 66055 FAN COOLED 200W LAMP HOUSING ALSO INCLUDED: 66151 SOCKET ADAPTER REFLECTOR, LENS, FILTER, AND SHUTTER Lamp Housing Pulled from Like New Equipment, Power Supplies Are New or Factory Refurbished Units in Factory Bag, Ignitors Are New ___________________________________________ We have the Power Supply Manual in .pdf format and will include a print out with the system, the original ignitor manual is included. No other manuals are included. Oriel Fan Cooled Arc Lamp Housing: TYPICAL INFO FOR 40-200W POWER TYPICAL INFO FOR FAN COOLED 200 W LAMP HOUSING ORIEL MODEL 66055: TYPICAL INFO FOR IGNITOR UNIT MODEL 68705: * Qty 1 ORIEL INSTRUMENTS 40-200W POWER SUPPLY MODEL 68805 * Qty 1 ORIEL INSTRUMENTS FAN COOLED LAMP HOUSING MODEL 66055 SVGA * Qty 1 NEW ORIEL INSTRUMENTS ARC LAMP IGNITOR MODEL 68705 * Qty 1 ORIEL INSTRUMENTS SOCKET ADAPTER MODEL 66151 * Qty 1 ORIEL INSTRUMENTS LAMP HOUSING REFLECTOR * Qty 1 ORIEL INSTRUMENTS LAMP HOUSING LENS and FILTER * Qty 1 MANUAL FOR ARC LAMP IGNITOR MODEL 68705 * Qty 1 PHOTO COPY OF MANUAL FOR 40-200W POWER SUPPLY MODEL 68805 The Oriel model 68805 arc lamp power supply was designed to meet the needs of the researcher who demands a highly regulated source of current for proper operation of arc lamp light sources. Constant current operation of these sources of radiation is required whenever a radiometric measurement is being made or whenever a highly stable light output is needed. Arc lamp sources will be operated in constant current mode by this power supply, with the output voltage being dependent on the arc lamp's impedance. The 68805 will provide a constant current up to 11 Amperes with a load voltage range of 0 to 100 volts. A power limit, which limits the product of output voltage and current to 300 watts protects the unit from output overloads. A constant current power supply regulates current even into a short circuit, and the model 68805 is safely limited to 12 Amperes or 300 watts. Also, the inrush current to the lamp is limnited to a maximum of 12 Amperes, and the reduced discharge current minimizes electrode erosion when starting the arc lamp. This power supply includes all of the circuitry to power the lamps, to operate the required external ignitor or ignitor built into Oriel arc lamp housing, and to meter the output parameters. The following arc lamps may be operated with the model 68805 Arc Lamp Supply: 6251, 6263, 6254, 6255, 6356, 6282, 6281, 6283, 6291, 6292. Remote capability also includes an input that may be used for external control, modulation, or intensity control. An interlock function is provided. Unless this interlock is made, the power supply will not operate. A system under test in our lab: ___________________________________________ ____________________________________________ * Money Order/Cashiers Check * We DO NOT accept Checks or COD's. |