Up
|
OMC Prince Die Casting Vacuum Pump System OMC Prince Die Casting Vacuum Pump System OMC Prince Die Casting Vacuum Pump System OMC Prince Die Casting Vacuum Pump System OMC Prince Die Casting Vacuum Pump System Info below is from Mfg website and may not be 100% applicable to this machine. OMC/Prince Vacuum Die Casting Systems by BuhlerPrince removes nearly all air and gasses from the die cavity and shot sleeve. This allows the die caster to produce higher quality, leak tight, or T6 heat treatable parts. BuhlerPrince provides systems, components, applications engineering, service and parts. Allen Bradley SLC 500 programmable controller. The patented control logic is backed up with an on board EEPROM. Operator interface is an Allen Bradley DTAM Plus providing on board control of all screen functions and communications. BuhlerPrince provides heavy duty, oil resistant cord and shielded cable for control signal input and output. The process piping module built with schedule 40 galvanized pipe with control solenoids and ASME certified vacuum receiver is built to provide one or two die casting dies with one or two vacuum lines. Filter canisters with commercially available filter elements protects vacuum valves and piping. Vacuum is delivered to the vacuum valve through the one or 1 1/4 inch tank truck hose provided. We do not have the ability to test this machine Please email us for other rates. Visit my Marketworks Gallery! Power Tools for Power Sellers! We will load your on your ground level or dock truck or trailer for free. YOU MUST USE OUR CLICKOUT LINK TO PAY BY ANY METHOD If you are the winner, click the button above to check out right now! All sales are final. No returns except if item is not as advertised. Any damaged or defective item will be replaced or refunded at our discretion if you notify us within 3 days of receipt of the item. Thank you in advance; Craig Quality Surplus LLC YOU MUST USE OUR CLICKOUT LINK TO PAY BY ANY METHOD If you are the winner, click the button above to check out right now! |