New walk in cooler 8FT x 10FT indoor norlake quick ship

UpUp


Subject: New walk in cooler 8FT x 10FT indoor norlake quick ship
ACityDiscount Restaurant Equipment: Nor-Lake Walk In Cooler 8ft x 10ft x 7'4ft Indoor No Floor KLB74810-C* Full Line of Nor-Lake Products Available - Manufacturer: Nor-Lake - Model: KLB74810-C*
ACDID43190 ACDMA176 ACDCA11881 ACDSEP ACDSP ACDTY7
ACityDiscount Restaurant Equipment
Nor-Lake Walk In Cooler 8ft x 10ft x 7'4ft Indoor No Floor KLB74810-C*
Full Line of Nor-Lake Products Available
Click here to see a non-scaled image.
Walk-In coolers and freezers from Norlake come standard with the following features:
* 26 gauge embossed galvanized with aluminum coating on all surfaces.
* Floorless models supplied with NSF listed vinyl sealers.
* NL9800 deadbolt locking handle with independent key/padlock feature and inside safety release.
* Self-closing door complete with cam-lift hinges.
* Spring actuated door closer.
* Fifteen year panel warranty.
* 18 month labor warranty, One year parts warranty.
* Kold Locker walk-ins are built of modular panels, and are insulated with foamed-inplace HFC-134a polyurethane insulation which is CFC and HCFC free. Each panel is designed to ensure ease of installation, long term reliability and high insulating efficiency.
* All panels are manufactured with male and female mating rails to ensure proper alignment during installation. The polyurethane insulation wraps around the return bend metal seams on both sections to create a lightweight panel of exceptional strength and durability. All panels are a full four (4) inches thick and provide a superior insulating value.
* The foamed-in-place cam locking fasteners ensure an airtight seal for maximum energy efficiency.
* Panels lock together tightly to assure an energy efficient walk-in.
* Edge caps for ends of floor and ceiling panels are foamed-in-place rather than overlapped or mechanically fastened. Edge caps cannot come loose, and they stay in place through the life of the walk-in.
* Interior and exterior complete to be 26 gauge embossed galvanized with aluminum coating. Models supplied with a floor will include a smooth aluminum interior floor surface.
* Panels to be four (4) inches thick, metal clad and foamed-in-place with HFC-134a polyurethane insulation which is CFC and HCFC free.
* Door sections manufactured at Nor-Lake are factory tested to assure proper fit, performance and alignment. All doors feature a stepped profile design that serves as a barrier to air flow which results in an energy efficient door system.
* Each Kold Locker walk-in compartment is equipped with a 26" wide door. The height of the door opening varies with the series of Kold Locker walk-in ordered. The 45 Series has a 59in high door, the Standard Series (6'7 high) has a 66in high door and the 74 and 77 Series Kold Locker walk-ins have a 78in high door. The door is selfclosing, flush mounted, infitting and constructed to incorporate heavy duty, molded ABS breaker which is permanently foamed-in-place.
* Doors are available with right or left side hinges and include two cam-lift hinges, magnetic gasket, double sweep gasket, Posi-close door closer, NL 9800 deadbolt locking handle with independent key/padlock feature and inside safety release. The doors are prehung in a four foot wide frame panel which is equipped with replaceable perimeter heater wire, magnetic stainless steel trim, 2-1/2in dial thermometer, vapor-proof light fixture with constant burning interior night light, and switch with exterior pilot indicator light.
* The door section is completely pre-wired within concealed conduit inside the door frame panel. 115/60/1 electrical is field wired to a junction box which is surface mounted on the interior frame above the vapor proof light fixture.
* Hinges and door handle are mounted to 1/2in synthetic insulated tapping plates. Each door section is complete with a heavy gauge galvanized steel heated threshold.
* Refrigeration System Specifications Capsule Pak: refrigeration systems consist of a unitized system which is factory assembled, wired, charged, tested and fully equipped for insertion into a factory prepared walk-in opening.
* The Capsule Pak system has a flush coil which keeps all components outside, allowing more storage inside. Models shall be available for wall or ceiling mounting for use on indoor or outdoor installations. Models are available for interior compartment design temperatures of +38° F., +35° F., -10° F., and -20°F. Installation is fast and easy. No plumbing required on indoor units.
* The Capsule Pak system evaporator section shall consist of an integral factory assembled component of the complete Capsule-Pak refrigeration system. The evaporator section shall be designed as to be located entirely outside the walk-in with no intrusions into the refrigerated space. The evaporator enclosure shall be constructed utilizing foamed-in-place HFC-134a polyurethane insulation and be equipped with a removable, gasketed access cover.
* All indoor Capsule Pak models shall be equipped with a discharge gas condensate vaporizer which requires no plumbing. All outdoor Capsule Pak models shall be equipped with low ambient controls consisting of crankcase heater, flooded condenser head pressure control and pumpdown cycle.
Finance Equipment For Your Business - Click Here
Finance This Equipment For Your Business
Available for purchases totalling $2,000 or more
Other Related Items from ACityDiscount
American Cold Storage 10ft Walk In Cooler Boxes
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
ACityDiscount Restaurant Equipment
Click here for a complete list of Recommended Items
[ in this Category ] [ made by Nor-Lake ]
Click here for printable version
(09:30 - 17:00 EDT)
Copyright 2007 ACityDiscount. All Rights Reserved
ACDID43190 ACDMA176 ACDCA11881 ACDSEP ACDSP ACDTY7