Lamber Under Counter Dishwasher
•Complete stainless steel construction AISI 304 18/10.
•Double skin with accoustic & thermic insulation.
•Wash tank slanted with rounded edges.
•Washing period cycle adjustable from 1 to 6 minutes.
•Wash and rince arms in stainless steel.
•Lower and upper rotating wash arm.
•Lower and upper rotating rinse arm.
•Door opening safety device.
•Extractable control panel for easy maintenance.
•Booster element: 6000 Watts (booster & tank element
•Booster capacity: 1 gal, 4 l.
•Tank element: 2000 Watts (booster & tank element alternate)
•Tank capacity: 4 1/2 gal., 18 l.
•Water inlet: 1/2 pipe with 3/4 male threaded (hose fitting) Must
be connected to hot water only. 120-140 F, 50-60°C
•Required drain: F85/92S: 1 1/2" ABS pipe at floor level. Gravity drain.
•Wash temperature: 140° F, 60°C
•Rinse temperature: 180° F, 85°C
Note: Service connections (electricity & plumbing) are in the back of the machine.
This high temperature machine releases steam. We do not recommend installation under melamine or arborite counters.
If a floor drain is not available, model F85/92DPS (with drain pump) must be ordered. A drain pump cannot be installed on site. Alternatively, the dishwasher can be raised by installing it on a 18" stainless steel (optional stock item #AC00005).
Additional models to choose from. Please contact us for a complete
selection of Lamber dishwashers.
DELUXE DISHWASHER WITH BOOSTER
Complete with stainless steel top and sides. 208-230 volts single phase. Insulated.
VOLTS HZ AMP. CIRCUIT BREAKER WATT CYCLE HEIGHT WIDTH DEPTH WT
230 60 28 30 6 650 1-6 mn 33” 23 3/4” 25 3/4” 179 lbs
RACK SIZE: Standard 20” X 20”
WATER CONSUMPTION PER CYCLE: 1/2 gal.
F85/92S: Deluxe dishwasher with booster, rinse & soap pumps