Up
|
* TILT, CRUISE, POWER STEERING 4-cylinder John Deere PowerTech™ Increased torque provides more power to get the tough jobs done Direct injected for better cold weather starting Common rail fuel system provides more uniform fuel delivery Engine oil cooler provides more efficient heat rejection 75 amp alternator yields additional electrical capacity for accessories Sloped hood for improved visibility LoadMatch™ feature keeps the tractor from stalling under heavy loads Twin Touch™ eHydro transmission MotionMatch™ feature enables the operator to customize the tractor's responsiveness Loader ready with a standard dual mid selective control valve and loader joystick Standard rear PTO; optional mid PTO Increased hydraulic implement flow Dual hydraulic pumps ensure a consistent fluid flow for steering and a separate supply to implements Performance Tracking System allows the key tractor systems and functions to be monitored from the driver's seat Wide-angle halogen lights provide more light and better light dispersion Tilt steering allows for easy adjustment and fully raises with a pull of a lever One-piece hood design improves serviceability, there are no sides to have to remove Operator Presence System that will shut the tractor off if the operator leaves the seat while the tractor is in gear ASAE and OSHA certified Roll-Over Protection Structure PTO HP (kW) - Gear transmission PTO HP (kW) - Hydrostatic transmission Cylinders/Displacement, cu. in. (liters) Dry type w/ safety element and air restriction indicator Engine Torque @ rated speed, ft./lb. (N/m) Fuel Tank Cap., US Gal. (L) (Open; Cab) U.S. gal./hr (L/hr) @ 100% load* *Fuel consumption rate should be used for comparison purposes only. Opt. Transmission; Forward/Reverse Clutch Disk Diameter, in. (mm) wet clutch Drawbar Tongue Weight Capacity, lb. (kg) 3527 (1600) or total combined front tire capacity, whichever is less. Pump Rated Output, gpm (L/min.) Maximum Operating Pressure (PSI) Remote Control Valves Available Lift Capacity (24-in. behind link arms), lb. (kg) Lift Capacity @ lift link ends, lb. (kg) Cooling system (includes coolant bottle), qt. (l) Crankcase with filter, qt. (l) Transmission and Hydraulic System, gal. (l) gear Transmission and Hydraulic System, gal. (l) hydrostatic Front Axle Gearcase (MFWD axle), gal. (l) Engage On-the-Go Rear Differential Lock Gear Shift Location - Console/Floor Dimensions - Open Station Tractors (4120, 4320, 4520, 4720) (B)-Overall length w/3-point hitch—in. (m)* (C)-Overall width (min)—in. (m) (D)-Inside width (min)—in. (m) (F)-To top of folding ROPS—in. (m) (G)-Ground clearance, drawbar support—in. (mm) Wheel Treads (center-to-center in narrow position): With brakes, 4WD off—ft. (m) Without brakes, 4WD off—ft. (m) 72-in. 7-Iron Commercial Mower Deck features include: * Deck is constructed of 7-gauge steel * Stamped from a single sheet of steel so that there are no welds to wear or break; the design also provides a smooth underside, without corners, to reduce material buildup, which affects performance and cut quality * Deck is deeper, providing increased vacuum action and reduced dropped clippings * Deep deck design, which allows for increased airflow and more lift of the grass; the deep deck design of the mower from front to back and side to side allows for a greater volume of grass to be cut at higher speeds * Plastic discharge shoot reduces damage to foliage and resists bending * Quick-change cutting height adjustment * Large anti-scalp phenolic caster wheels for smooth operation * Mower deck has a 5/8-in. solid steel bar welded to the mower deck perimeter for added strength |
