Up
|
Information - Questions? Call Ask for Chip or Trip The 8920B is a full-function test set based upon the Agilent 8920A design but with increased measurement speed, accuracy, and larger user memory (928 kbytes standard). The 8920B uses PCMCIA memory cards for data storage and radio test programs. The 8920B has the functionality, speed, and accuracy for testing land mobile radios, cellular telephones, and other communications systems while improving throughput and quality in manufacturing. This unit has the following features: * More than 20 complete instruments * Frequency range 250 kHz to 1000 MHz * Accuracy of stand-alone instruments * Flash ROM updates from front panel * Built-in IBASIC computer with PCMCIA format memory cards * Call processing subsystem for simplified cellular test and troubleshooting This unit has the following specifications: Signal Generator Specifications * Frequency Range: 250 kHz to 1 GHz * Output Level Accuracy RF In/Out Connector: +/- 1.2 dB (level greater than or equal to -127 dBm) * Output Level Accuracy Duplex Out Connector: +/- 1.0 dB (-127 to +7 dBm) * Output Level Range: -137 to -19 dBm into 50 ohms (std, other options available) * Reverse Power: 60 watts continuous, 100 watts for 10 seconds/minute * Non Harmonic Spurious: <- 60 dBc (at > 5 kHz from carrier) TDMA Signal Generator Specifications (Option 500 or 800) * Frequency Range 824 MHz to 894 MHz * Output Level Range: RF In/Out: -22 dBm to -127 dBm Duplex Out: +4 dBm to -127 dBm * Residual Error Vector Magnitude: <3.0% * Residual Phase Error: <2.6 degrees * Residual Magnitude Error: <2.6% * IQ Origin Offset: <-30dBc within 15 degrees C of last calibration * Frequency Error: +/-4 Hz plus reference error * Frequency Range: dc to 25 kHz * Frequency Accuracy: 0.025% of setting * Output Range: 0.1 mV to 4 Vrms * Output Accuracy: +/- 2% of setting plus resolution * Frequency Measurement Range: 400 kHz to 1 GHz * Level Measurement Range RF In/Out:(std, other options available) 1 mW to 60W continuous 100W for 10 seconds/minute * Level Measurement Range ANT IN: -36 dBm to +20 dBm in auto-tune mode * Frequency Measurement Accuracy: +/- 1 Hz plus timebase accuracy * Power Measurement Accuracy: +/- 5% of reading +/- 0.01 mW for temperature range of 25 +/- 10 degrees C TDMA Analyzer Specifications (8920B Option 500 or 800) * Frequency Range: 824 MHz to 894 MHz * RF In/Out: 1 mW to 60 W (0 to +47.8 dBm) * Antenna In: -36 dBm to +16 dBm * Input Frequency Setting Error: 1 kHz * Frequency Error Accuracy: +/- 2.5 Hz plus reference accuracy * Residual Error Vector Magnitude: <1.3% * Error Vector Magnitude Measurement Accuracy: +/- 0.4% + 2% of reading * Residual Phase Error: <1.0 degree * Residual Magnitude Error: <0.9% * I/Q Origin Offset Accuracy: +/-0.5 dB for values to -40 dBc * Frequency Measurement Range: 20 Hz to 400 kHz * Frequency Measurement Accuracy: +/- 0.02% plus resolution plus reference accuracy * AC Voltage Measurement Range: 0 to 30 Vrms * AC Voltage Measurement Accuracy: +/- 3% of reading (20 Hz to 15 kHz, inputs >/= 1 mV) * DC Voltage Measurement Range: 100 mV to 42 V * DC Voltage Measurement Accuracy: +/- 1.0% of reading plus DC offset * Frequency Range: 300 Hz to 10 kHz Spectrum Analyzer Specifications (Option 102) * Frequency Range: 400 kHz to 1 GHz * Frequency Span/Resolution Bandwidth (coupled) Span Bandwidth <50 kHz 300 Hz <200 kHz 1 kHz <1.5 MHz 3 kHz <18 MHz 30 kHz >/= 18 * MHz 300 kHz Plus full span capability * Display: Log 1,2,and 10 dB/div * Reference Level Range: +50 to -50 dBm This unit has the following options installed: * 001 = High Stability Time Base * 004 = Tone/Digital Signaling * 007 = Low Level RF Power Measurements * 011 = CCITT Weighting Filter * 013 = C-Message Weighting Filter * 051 = 6kHz Bandpass Filter This item is in excellent condition, working perfectly, and comes with a 14 Day Guarantee Against DOA. Our 14 Day Guarantee Against DOA (Dead On Arrival) does not guarantee compatibility. If something is listed AS-IS, there are absolutely no returns, refunds, or exchanges. Cashier's Check, Company Check, Money Order, and Personal Check Bank Wire - Contact for Information Bank Wire - Contact for Information |