Up
|
Information - Questions? Call Ask for Chip or Trip The Agilent 83433A transmitter and the Agilent 83434A receiver provide the optical interfaces necessary to allow bit error ratio testing of 10 Gb/s optical transmitters and receivers used in 10 Gb/s SONET/SDH, 10 GigE, and IP optical net-works as well as systems employing forward error correction (FEC). The 83433A and 83434A may be combined to create a complete optical link for system or fiber testing. The 83434A receiver’s non-retimed output is designed for use with the Agilent 71612C 12.5 Gb/s Error receiver output decision threshold and timing to optimize BER. Because of this, Q-factor and eye contour analysis for optical signal degradation testing can be accomplished using the 83434A, 71612C and the E4543A Q-factor and eye-contour analysis software. The 83434A receiver recovers clock and data from digitally modulated SONET/SDH OC-192/STM-64 optical signals. The amplified PIN-diode produces a linear output with AGC stabilization. The receiver is designed to provide –16 dBm sensitivity for a 2 to the 31st -1 PRBS with a BER performance of at least 1 x 10 to the -10. The Agilent 83433A 10 Gb/s Lightwave Transmitter operates at 1556.55 nm. This item is in excellent condition, working perfectly, and comes with a 14 Day Guarantee Against DOA. Our 14 Day Guarantee Against DOA (Dead On Arrival) does not guarantee compatibility. If something is listed AS-IS, there are absolutely no returns, refunds, or exchanges. Cashier's Check, Company Check, Money Order, and Personal Check Bank Wire - Contact for Information Bank Wire - Contact for Information |