Up
|
This is a used item that does not include a pc or software that need be purchased from gerber garment technology if you want to use their system for cutting control. They make these for cutting fabrics stacked to thicknesses of 2 inch or so by a reciprocating knife. the system uses a integrated knife sharpener that is also controlled from PC. It has 2 db-25 connectors marked to computer for interface. Perfect for conversion to a cnc router or a cnc plasma cutter or as original for knife cutting fabrics and broadgoods. This is the control cabinet and full documentation and drawings service maint etc manuals. it is also the training and other mans for the software C-200B ver 1.3.0. INSIDE THE CABINET APPEARS TO ME TO BE ....pOWER SUPPLIES FOR ALL INTERNAL COMPONENTS AND DRIVES. sERVO aMPLIFIERS FOR AT LEAST 4 AXIS MOTORS. aNOTHER AXIS DC DRIVE AMP SEPERATE MOUNTED BUILT BY HAMPTON DRIVES. (I THINK THIS IS A 4 QUADRANT REVERSABLE DRIVE FOR AN AXIS OR CONVEYOR THAT DOES NOT NEED PRECISE POSITIONING. a RACK MOUNTED MOTION CONTROLLER CPU AND OTHER INTERFACE CARDS, THEY HAVE CONNECTED TO THE RACK ELECTRONIC BOARDS PLUG INS FOR TACHS FOR 2 X AXIS ONE Y AXIS ONE C AXIS AND A K AXIS AND PHOTO DETECTORS OR RESOLVERS INPUTS FOR THE X Y C AXIS'. i AM SURE FROM READING SOME OF THE DOCUMENTATION THAT IT DOES USE RESOLVERS TO TRACK POSITION. iNTERFACE CARDS WITH TESTPOINTS FOR AXIS LIMITS ANALOG VOLTS INPUT/FEEDBACK, MOTOR CONNECTION PLUG CABLE. lINETAMER POWER LINE FILTER TRANSFORMER. sOLID STATE RELAY CARD FOR INTERFACE TO VACUUM BLOWER AND ANCILLARY UNITS TO SUPPORT FULL SYSTEM. iF YOU WANT THE MONITOR THAT WAS IN IT ONE CAN BE INCLUDED. JUST A STANDARD 12" VGA. cABINET COOLING SYSTEM WAS REMOVED TO DISPOSE OF R-12 AND THEN DESTROYED. THOUGH I WILL GIVE YOU A HOFFMAN HEAT EXCHANGER OR CABINET COOLER AS WHICH I HAVE STOCK.SERVOS MUST HAVE BEEN STRONG TO BE CUTTING THICK STACKS OF KEVLAR AND BORON TUNGSTEN GOODS AT SPEEDS OP TO 600 INCH PER MINUTE iF THERE ARE NO PIX YET I HAVE NOT UPLOADED THEM SO PLEASE DONT CLICK ASK ME A QUESTION AND SAY DO YOU HAVE PIX. i will add as i get them. It was operable when decomissioned and was replaced with a new cutter. WEIGHT IS APPROX 350 LBS AND AS SKIDDED IT WOULD BE SAFE TO SAY 400. LOCALLY IT MAY BE PICKED UP OR WE CAN GET IT DELIVERED TO YOU OUR TRUCK BUT YOU NEED APPT. |
